Saltwaternooby
SPS junkie
1st is a ViaAqua cc-25 1/4hp rate for 75gal -100$ obo
It needs a new temp sensor, or you can bypass it and use your own controller(which is what i would do). LCD works and all buttons also.
In-Line Chiller with LED Digital Controller.
240 Watts Spinning Compressor.
Titanium Heat Exchanger for Aquarium up to 75 gallons.
Specifications:
Power Consumption: 240 Watts
Current: 2 amp
Refrigerate Medium: R134a
Minimum Water Flow: 100 GPH
Maximum Water Flow: 400 GPH
Inlet/Outlet: 3/4"
2nd is a 1/2hp Custom Sea life in line chiller without case -140$ rated for 250g plus system
Has 1 1/2 or 2" inch inlet and outlet and need a controller. It turns on and i can hear the compressor running but no other way for me to test.
I bought both in a lot of stuff, and dont need either. Make offer
It needs a new temp sensor, or you can bypass it and use your own controller(which is what i would do). LCD works and all buttons also.
In-Line Chiller with LED Digital Controller.
240 Watts Spinning Compressor.
Titanium Heat Exchanger for Aquarium up to 75 gallons.
Specifications:
Power Consumption: 240 Watts
Current: 2 amp
Refrigerate Medium: R134a
Minimum Water Flow: 100 GPH
Maximum Water Flow: 400 GPH
Inlet/Outlet: 3/4"
2nd is a 1/2hp Custom Sea life in line chiller without case -140$ rated for 250g plus system
Has 1 1/2 or 2" inch inlet and outlet and need a controller. It turns on and i can hear the compressor running but no other way for me to test.
I bought both in a lot of stuff, and dont need either. Make offer
