Cloud cover

[AussieAdam]

Whenever cloud cover comes on my schedule only one of my radions dims significantly, always the same radion (left in the photo)
Have done calibration several times, buttons are set off on all radions and they are all in the same tank group, Could it be a compatibility issue by mixing xr30's and the xr15?

 

[nycreef]

I have the same problem so I took off the cloud cover until I figure it out. Thought something was wrong with that one light.

 

[AussieAdam]

I have the same problem so I took off the cloud cover until I figure it out. Thought something was wrong with that one light.

Are you mixing xr30's with xr15's?

 

[nycreef]

I have 8 pros so I don't think it's the fixtures themselves but mabe the program.
I'll wait to hear an answer from ecotech. Might just be a glitch.

 

[Alex Y EcoTech]

Aussie,

I would recommend doing a calibration on all of your Radions. To do the calibration, please follow the steps below:

1. Power down all Radions for 30 seconds
2. Connect via USB to a single Radion and start the Connection Manager (If not using a ReefLink)
3. Open EcoSmart Live using either Google Chrome or Safari as your internet browser.
4. Select the "Devices" tab at the top of the screen
5. Select the 'Gear" icon next to Light 1
6. Select "Calibrate" and carefully perform the steps in a dark room
7. Repeat steps 5 & 6 for each Radion
8. Select the "Done" button to save changes
9. Finally select the "Program Aquarium"