current pumps control with timer

[Robinson]

Hi,

is it possible to assign timers to the currents pumps?

Like i understand it i can set sequence, surge etc. but as a constant + reduce flow at night etc...

I would like to time my tunze pumps to a timer so that they once every day perform a neutrient removal process.

Example:

I would like my pumps once a day to perform the following:

Pump 1: on 01:00 PM off 01:30 PM. Rest is off.
Pump 2: on 01:30 PM off 02:00 PM. Rest is off.
Pump 3: on 02:00 PM off 02:30 PM. Rest is off.
Pump 4: on 02:30 PM off 03:00 PM. Rest is off.

From 03:00 PM to 01:00 PM all pumps on normal program.

I was able to program this on a competitive computer. This way i was able to get a VERY efficient waste removal sequence once a day.

Any way i can program this to the profilux? or maybe an idea to a firmware update ?

btw: This computer rules, with the programmamble logic, i am so happy with everything it provides and is has made my life so much easier since i am at work 14 days at a time every six weeks. AWC, ATO, Remote access etc.

Best Regards

Robin

 

[GazzMan]

Just set the timers to switch on designated sockets at the required times, for the required period of time.

Or am I reading you wrong?

 

[Robinson]

Just set the timers to switch on designated sockets at the required times, for the required period of time.

Or am I reading you wrong?

Guess i can do that, but i dont want to use 4 programmable sockets just for circ pumps... in the 'current pumps' section you can set you currents sequence etc... also turn them off without removing the plug.. but to assign a timer to the pumps (1-10v) like in the programmable logic, levels etc. is not possible...

 

[Robinson]

Guess i will have to get 4ea individual timers to put on my tunze 6095 pumps for this feature.... it should not not be nessesery as this is a quick 'fix' for the GHL programmers... maybe i should try the profilux forum...