Current USA 1/3 HP

[LoneRegister]

I am getting ready to setup a cooler/chiller.

Due to spacing reasons - I have it in an area where I need a suplimental fan to increase cooling airflow.

The one that I am getting will be the 1/3 HP Current USA 2646 Prime.

Anyone know which way the unit is pushing air through it's radiator? From front to back or back to front?

 

[LoneRegister]

Additionally-

What are the effects of more or less GPH on chillers?

 

[918ReefCpl]

Using a pump with too low of a GPH "could" cause the water in the lines to 'freezing' up and conversely too "fast" GPH could result in the cooler not reducing the water temp enough due to the rate of water passing thru the radiator section not having enough time to transfer the "heat" its carrying to the 'radiator' section of the cooler. Just make sure that you have sufficient clearance around the cooler for decent airflow (even with the supplemental fan) and keep the vents/grills dustbunny free or that will cause the cooler to work harder. We have a 125 and while its 'supposed' to use a 1/4 HP we are looking at a 1/3rd HP cooler to minimize its run time. Just some thoughts...