Daimyo68
Active member
Gonna have to let this tank go as I have no room to keep it. I've had it covered and stored in a friends house now for a little over a year, and they are moving... I'll get another one from Felix when the time comes.
$2500
-150g Rimless ReefSavvy
-Dimensions - 48x30x24
-3 Sided Starfire, 3/4" Glass, Black seals
-Glass Internal/External Overflow/Drain boxes. External box is off the tank currently, but I will reattach it using Momentive RTV103 as it was previously attached when I built and installed the overflow boxes.
-BeanAnimal Silent Drain System installed (drain flow capable of 1500gph, if you so desire). All Drain and Return Plumbing is with the system. (Return Plumbing comes up over the back). All plumbing is hard secured to the stand. See Images
-Custom Stand Built by Oceans Below - Formica White Interior (Sealed at all seams), and a Black Exterior. Both doors are held on with Magnets, so removing them is easy for plenty of access below with the hindrance of "open doors".
-I built a custom lid for this tank also. Yes, it defeats the purpose of a rimless tank, but I didn't want to lose hundreds worth of jumpers. The lid is roughly 4.5" high, and has corner braces that you can drop a framed screen into. It is also open enough at the so that 1" returns can come over the back and into the tank.
-There is a scratch on the left front glass, not noticeable when it has water in it.*
-You will need a sump. A*40g Breeder fits in the stand easily through the front. Pushed to 1 side as I had it, it leaves roughly 1 foot of space on the side and front of the sump. Plenty of room to put dosing containers, etc. I had 3g Alk and Cal containers in there without issue. Easy to fill when needed.
I also have the paint for the stand to be touched up.
$2500
-150g Rimless ReefSavvy
-Dimensions - 48x30x24
-3 Sided Starfire, 3/4" Glass, Black seals
-Glass Internal/External Overflow/Drain boxes. External box is off the tank currently, but I will reattach it using Momentive RTV103 as it was previously attached when I built and installed the overflow boxes.
-BeanAnimal Silent Drain System installed (drain flow capable of 1500gph, if you so desire). All Drain and Return Plumbing is with the system. (Return Plumbing comes up over the back). All plumbing is hard secured to the stand. See Images
-Custom Stand Built by Oceans Below - Formica White Interior (Sealed at all seams), and a Black Exterior. Both doors are held on with Magnets, so removing them is easy for plenty of access below with the hindrance of "open doors".
-I built a custom lid for this tank also. Yes, it defeats the purpose of a rimless tank, but I didn't want to lose hundreds worth of jumpers. The lid is roughly 4.5" high, and has corner braces that you can drop a framed screen into. It is also open enough at the so that 1" returns can come over the back and into the tank.
-There is a scratch on the left front glass, not noticeable when it has water in it.*
-You will need a sump. A*40g Breeder fits in the stand easily through the front. Pushed to 1 side as I had it, it leaves roughly 1 foot of space on the side and front of the sump. Plenty of room to put dosing containers, etc. I had 3g Alk and Cal containers in there without issue. Easy to fill when needed.
I also have the paint for the stand to be touched up.
Last edited:
