My Current USA drop-in chiller jsut sprung an air leak in the coil.
I realized it wasnt working normally today when it took a while to bring down the temperature from 80 to 77 degree. It would run constantly for over 40 minutes without a drop in temperature. I then unplug the unit to shut it off. Afterwards I look under the sump to see air is leaking from a pin size hole in the coil.
Im not sure if its air or what but i took the coil out of the sump so its sitting outside right now unplugged.
Im not familiar with the integrity of the coils but after inspection i see several corrosion areas along the coil.
I realized it wasnt working normally today when it took a while to bring down the temperature from 80 to 77 degree. It would run constantly for over 40 minutes without a drop in temperature. I then unplug the unit to shut it off. Afterwards I look under the sump to see air is leaking from a pin size hole in the coil.
Im not sure if its air or what but i took the coil out of the sump so its sitting outside right now unplugged.
Im not familiar with the integrity of the coils but after inspection i see several corrosion areas along the coil.