Echo Tech Or Tunz E Stream Help!!

[LEPRECAUN]

I'm working on a 450 gallon set up. The acrylic will be 1" thick. The magnetic holders for the units are only good for up to 3/4" tanks. Also with the tank having about a 4-5 inch lip all the way around the top, I don't know how you would use the Tunze holders to attach then to the rim of the tank.

Could someone please help me figure out how to mount them in my tank? I want to use 4 of them with the contoller (tunze).


Thanks for your help,


LEP

 

[snorvich]

I love my various Tunze streams (7 total). You could get strong cleaner magnets and use them to mount the holders. Just a thought.

 

[LEPRECAUN]

<a href=showthread.php?s=&postid=10541805#post10541805 target=_blank>Originally posted</a> by snorvich
I love my various Tunze streams (7 total). You could get strong cleaner magnets and use them to mount the holders. Just a thought.

Hey there is an idea! Would you use epoxy to glue the tunze to the magnet?



Thanks,

LEP

 

[Scuba Dog]

I went with the deco rock to hide the stream. then agen I used the tunze to supliment a closed loop,

 

[RichConley]

You could drill a hole in the eurobrace, and mount them that way.

 

[snorvich]

Actually I used the Tunze magnets inside the tank and the cleaner magnets outside the tank. The only difference between using Tunze outside and cleaner magnets is that you can get various strength cleaner magnets.

 

[kev apsley]

have you looked into the Vortech Pumps?

 

[Deepsea2005]

My 300g acrylic is 1" thick with 3" Euro brace.
I use the Tunze Magnet Holder 6200.50 and they are doing fine; I have 4.
You can see them on the back of the tank

 

[LEPRECAUN]

<a href=showthread.php?s=&postid=10560422#post10560422 target=_blank>Originally posted</a> by Deepsea2005
My 300g acrylic is 1" thick with 3" Euro brace.
I use the Tunze Magnet Holder 6200.50 and they are doing fine; I have 4.
You can see them on the back of the tank

Thats great new!!! If you haven't had any problems with them falling off- Then I don't see why I would either.



thanks for your help


Ken