ESV B-Ionic Seawater System In Stock!

[Jeremy B.]

We have just received our first shipment of the new ESV B-Ionic Seawater System, in both 50gal and 200gal mix sizes. Salinity levels of 34ppt are claimed to yield element measurements of:

Calcium: 450ppm
Alkalinity: 9.1dkh
Magnesium: 1400ppm

50 Gallon mix http://www.premiumaquatics.com/Merc...n=PROD&Product_Code=ESV231&Category_Code=Salt

200 Gallon Mix http://www.premiumaquatics.com/Merc...n=PROD&Product_Code=ESV232&Category_Code=Salt

For more information please see the link to the ESV PDF....

http://www.esvco.com/B-IonicSeawaterNov.pdf

A photo of the products included in your new chemisty set

 

[GQuinn]

Do you have to make the whole 50 gallons at once when you use this system? I see there are scoops included, is this for making partial mixes?

Gary

 

[plantguy]

There are instructions for smaller batches as well.

 

[DevilBoy]

is this system used just like mixing a regular salt mix such as tropic marin? or is this just a supplement system that you add to your existing salt mix?

Has anyone used this yet? what have been the results?

 

[crab0000]

If only making a partial batch and without knowing exactly how much water you have is there a way to do it? I have a 37 gallon Brute trash can that I use to mix saltwater in, but don't fill it to the top (so I can roll it to the tank without spilling it everywhere), so I'm not sure exactly how much is in there. Can you add the salt until it reads 1.026 and keep up with how much it takes, then add a certain ratio of the other ingredients? Sorry if the question is confusing.

 

[Jeremy B.]

This is just like mixing any other salt mix, the only difference is you just have more parts to measure out and mix up. The 50gal mix for example comes with a chart to mix up at the following gallons:

1.02
5.10
10.20
20.40
40.80
51.0
102.0

Thanks,
Jeremy

 

[MadTownMax]

Do you have a link (or can you send me) this chart for smaller batches. I received my box but there are no instructions inside. There are instructions printed on the two bottles but none on the bags.

Salt/Mg batch 113009 if you have any other missing charts and need to track it.

 

[Aquabacs]

Here are the lower batch mixes. This salt is awesome!

Final Batch
1.02 gals
Water= 1 gal
Sodium Chloride= 1/4 cup + 1 tsp
Magnesium Sulfate= 1tbsp + 2 tsp
Liquid Component A= 1.28 oz (38ml)
Liquid Component B= 0.64 oz (19ml)

Final Batch
5.10 gals
Water= 5 gal
Sodium Chloride= 1 1/2 cups
Magnesium Sulfate= 1/2 cup
Liquid Component A= 6.4 oz (189ml)
Liquid Component B= 3.2 oz (95ml)

Final Batch
10.20 gals
Water= 10 gal
Sodium Chloride= 3 cups
Magnesium Sulfate= 1 cup
Liquid Component A= 12.8 oz (378ml)
Liquid Component B= 6.4 oz (189ml)

Mike

 

[catastrofe]

This is just like mixing any other salt mix, the only difference is you just have more parts to measure out and mix up. The 50gal mix for example comes with a chart to mix up at the following gallons:

1.02
5.10
10.20
20.40
40.80
51.0
102.0

Thanks,
Jeremy

This is awesome! I can get 102 gallons out of the 50 gallon mix. Now that's a deal!!