scubabum1983
New member
20 gal fuge. Sitting on a plywood stand. Trimmed, stained red pine. Tank is drilled with a right side rear corner drain. Low profile setup with a 90 degree PVC pipe with a cap cut to break the surface and agitate the water up going down the drain. 6 inch deep sand bed sea floor grade caribe sea sand. Pukani rock rubble built up into a 90 degree wall. Small pump to return water from the sump. Drain set up with a T and drilled cap to prevent toilet flush drain noise. Return has a 90 over the back to keep it clean looking. Right side and rear are painted black to prevent light spill over. Tank is just a little over a year old. Light is set up with a 150w 10k double ended halide. Pendant light is hung over the top with an adjustable height mount to allow for different light heights. The mount moves up and down on the back of the stand where it is mounted. The suspension wires also adjust up and down. It was set up for a mangrove to allow growth for a mangrove. I was able to grow mine to the point it's 3.5 feet high and several hundred leaves.
Stand, rock, pump, sand light (no ballast, any 150w hqi will work) pendant mount $85
Tunze 6045 pump with box and paperwork, fantastic adjustable gpm pump. $75
Stand, rock, pump, sand light (no ballast, any 150w hqi will work) pendant mount $85
Tunze 6045 pump with box and paperwork, fantastic adjustable gpm pump. $75
Last edited: