I've resubmitted this question after more careful assesment of the situation.....
I have 2 6100 stream pumps connected to a single controller (7091) via a 7092.34 Y adaptor. The 7091 contoller is set at power1=100% Power2=50% Pulse=50%. When I press the timer button the pump on led is off, the power1 & power2 led alternates, but when the power1 led is lit, both pumps activate ( at a seemly lower output than set ), when power2 is lit the pump turns off as expected, after the timed interval the pumps return to the expected function..
Is there an obvious fault with the setup?
..Tony
I have 2 6100 stream pumps connected to a single controller (7091) via a 7092.34 Y adaptor. The 7091 contoller is set at power1=100% Power2=50% Pulse=50%. When I press the timer button the pump on led is off, the power1 & power2 led alternates, but when the power1 led is lit, both pumps activate ( at a seemly lower output than set ), when power2 is lit the pump turns off as expected, after the timed interval the pumps return to the expected function..
Is there an obvious fault with the setup?
..Tony
