fish poo removal

I'm sorry, I didn't realize your thread was posted in the fish breeding forum. I'm not familiar with the setups you guys have for this.
 
Siphoning fish poo is a labor of love for most of the regulars here.

I assume you are talking about grow-out tanks?

Florida Aquafarms makes a tool that is supposed to be good for making this chore easy, but I haven't tried it (am considering though). Sometimes I use an old credit card to scrape up the sticky films and siphon as I go.

It helps to keep good circulation in the tank as well--keeps the poo suspended where it will find its way into the filters. The remaining stuff usually collects in a small pile and it's a simple chore to "spot-siphon" it out every day or so.
 
You can make something similar to the one on FAF for less than $22-$26 and shipping. All their siphon head is a T with caps on the end and then they cut out a piece of the T with a dremel or something, so there is a slit to siphon up the poo. Then you can glue a piece of sponge or I like the green Scotch bright pads to the top to scrub the algae.
Or buy a couple of these fittings http://www.marinedepot.com/md_viewItem.asp?idproduct=LL1315
and the connector http://www.marinedepot.com/md_viewItem.asp?idproduct=LL1319
and use a coupling (threaded x slip) to attach to your desired length of pvc, hose barb and hose and you have a siphon.

HTH

Christine
 
Send me $22 and I'll send you a Scotch Brite squeegee and a length of tubing,...

or you can get these yourself for about $4.
 
Well, yes, I would make my own instead of paying the $$ for shipping a few PVC pieces, but I was considering using the idea :)

Those flare nozzles do seem like a good idea...thanks for that Christine
 
No problem, if you need a picture of it let me know and I can take some in case my descriptions were too confusing.

Christine
 
If you put a valve on it, and leave it full of water, with the valve closed when you are thru with the chore, you only have to suck the water thru once. Open the valve, instant siphon, forevermore.

Make it easy, and you'll do it more often.
 
I used them for years down at the farm, what Mano has, get the tee. put the caps on and them slice it in half with an angle with a hacksaw, then cut a piece of scoth brite silicon it to the tee and slit a hole.

I am a step ahead of you,:-)

if you want to spend more time with the kids and don't like the fabulous taste of sea water,

get a long hose that can go to all the tanks i have 30' long rows, install a 1/2" valve in a pump return line, and then get one of these

http://www.marinedepot.com/md_viewItem.asp?idproduct=PY1263

and attach it to the valve, drill a hole in the main system drain and stick the pyton valve to drain in the poliester socks.

When I am ready to siphon I just open the valve the suction starts and when i am done i just change the socks and all the poop is gone. I do 20 40 gal. tanks in 20 minutes.

Ed
 
Hi guys, I have two problems... I´m portuguese native speaker and worse than anyone here in DIY projects (yet ;)).
So, please, show me a picture (closer than that on FAF website) and there will be light in my mind.
Thanks,
Anderson.
 
Here is the one I use now since I don't have a picture of the one with the T....



This design is easier to work with than the T I think because you can adjust the angle of the siphon head to customize it for your particular tank design.

Christine
 
On every package of scotch brite, it says "Not for aquarium use"

I assume because of antibiotic additives. You guys really use Scotch brite pads?
 
<a href=showthread.php?s=&postid=8475997#post8475997 target=_blank>Originally posted</a> by Kathy55g
On every package of scotch brite, it says "Not for aquarium use"

I assume because of antibiotic additives. You guys really use Scotch brite pads?

Yep, been using them for years in aquaculture and never had a problem. Maybe they put the warning on there so someone doesn't try to scrub their acrylic tank with one?

Christine
 
Back
Top