Fish room

TFT, that pump looks good and is about $70 - $175 cheaper than the Dolphin I was looking at depending on the seals I went with on the Dolphin. Do you have any direct experience with the ReeFlo pumps?

Semi-driect.

In a store I work at we run lots of ReeFlo pumps and they have been running flawlessly for years. ReeFlo is a very high quality brand.

Lots of us here on RC use ReeFlo exclusively.
 
I run a Panworld 150ps, because of the 28ft head height ( I am running about 15 ft head height to my display). I figured it would be a little too much flow, so I split the return line and added two gate valves. I have most of the flow running to the display tank, and the other line runs into my frag tank and then back into the sump. That way I have the right amount of flow in the display without restricting the return pump as much. I also get the benifit of flow in the frag tank and that drains back into the refugium for another chance at removing nitrates.

That makes complete sense now. Thanks for the explanation and that sounds like a great idea. I think I may just do that in my setup.
 
Ok so I pulled the plug on a couple of things today...I found a Reeflo Barracuda that was used for an hour and then taken down for a larger pump. I got it for $200, I felt this was a good price. Any thoughts? Also, got the 100g stock tank instead of the 75g. I did up a drawing in paint and can't figur out how to attach it. Once I do I will post for comments and recommendations.
 
Back
Top