flow for a 65

kidkaos520

New member
trying to decide if I should ditch the mp10 for a 40 or go with a mixture or anything else in between. Open to suggestions looking to keep mainly zoas and lps with a couple acros.:reading:
 
imo 2 mp10s are better then a single mp40!

For a 36" tank, I agree.

I had a MP10 in my 36x18x18 and it was enough flow for my LPS/softy dominated tank that also has some SPS. But I ditched the MP10 for 2xTunze 6055s because the MP10 was a little too noisy for a tank that is in my bedroom.

If you don't mind the noise, I'd add a second MP10 if you're not getting enough flow and run them in anti-sync.
 
never really looked into anything else....how are the 6055's?

Flow-wise, not as good as MP10s, IMO. But I'm more concerned with noise and they're pretty quiet at > 50% and silent at < 50%, which is where I run them at night and why I made the switch.
 
well right now my return pump is louder than my mp10...still trying to fine tune it to where it is more quite. So if I can find another silent mp10 then I will be ok.
 
Back
Top