follow me and my new 75 gal.

kau_cinta_ku

kau_cinta_ku

New member
i got this 75 gal. tank from a local reefer that had just upgraded and i thought sence i already got my 46 going good i am gonna take my time and set it up the way i want it to and get everything for it first before i add any livestock so i don't have to keep adding equpment later on when it feels i need it. it is gonna be a very slow process so for those who do keep up with this thread i am sorry but i will do the best i can and any advice along the way will be great. so first off we will start with some pic.s of my 46 gal.:D it isn't the greatest but i am happy of it for being my fist saltwater tank
1.jpg


and now for the 75 gal that i got which IMO is gonna go through alot before i am done with it.
PIC00005.jpg


first i begun to drill 2 holes in the tank for 1 1/2" bulkheads 1 for the corner overflow (will not do the over the tank kind again it is to much work) and the 2nd hole for the closed loop.

here are the 2 holes i put in the tank all nice and perrty
:D with the bulkheads installed
PIC00013.jpg


well that is all i have for now but if you have any questions or comments so far i am glad to hear them and thanks for looking
 
Sweet! :thumbsup:

Did you drill the tank yourself? If so that's awesome! Do you have a target finish time to make the move to the 75g. I know you said it will be a slow process, but any idea? :)
 
thanks for the great comments.

yes i did drill the tank myself. very nervous at first but after a couple practice parts it was so easy:)

as for a target date i am hoping if all goes to plan will be done sometime around early next year. all depends on how much i can afford and how much time i can put into it but money will be the main part:p but don't wanna make any mistakes this time and don't wanna do things cheap this time around like i did the 46 gal. then having to get all new parts to make up for the crappy junk i put into it:rolleyes:

BTW it looks alot better now with the black background on there so the bulkheads blend in with the back
 
Good for you for taking your time and doing it the way you know is best. So many just rush in and make mistakes along the way, only to have to correct them later.

Can we see an updated picture with the black background? :)
 
Good for you for taking your time and doing it the way you know is best. So many just rush in and make mistakes along the way, only to have to correct them later.
Click to expand...
ty and yes taking my time to make it the way i want will be alot better as i made alot of mistakes on the 46gal. and corrected them later but luckly i didn't lose any fish so that was a good thing:)
Can we see an updated picture with the black background?
Click to expand...
i will have a pic. of it in the morning for you

Question, won;t the 2 bulkheads you created make a lot of noise?
Click to expand...
from what alot of ppl tell me the bigger the bulkheads the better and they say it will be quiet. i can always restrick the flow with a ball valve. as for the hole in the bottom left it will have an acrylc overflow box put in there so it will work just like a normal RR tank but i won't find out till i get the pumps for it and freshwater test it.

Can you give some details on how you drilled the tank?
Click to expand...
i will be able to explain this better in the morning when i have more time but i did take pic.s on when i was drilling it so i will post them also
 
ok sorry for the wait as i didn't have the time last night to post the pics. (had to get to work to make some moola)so here they are.
first is the pic. with the bulkheads and black background to show how nice they blend in. well kind of hard to tell cause of the reflection of the glass but it does look much better in person and i am sure once filled up with water it will look better and easier to get a good pic.
PIC00009-1.jpg

PIC00007.jpg


ok and now we will talk about the drilling part. i first ordered a 60mm diamond bit from lao off ebay and when i got it i tried it out first on a 10 gal. and it was good and easy so i was ready for the 75 gal.
here is the pic. of my trusty craftsman drill and the bit i used. if you are gonna use a cordless just make sure your battery is full and an extra battery on hand just in case.
PIC00009.jpg

here you can see a pic. of the tank right before i started drilling. i took a plastic cup i got from taco johns and cut the top half off. next i used plumbers putty and rolled it into a nice strip and attached it to the cup i just cut and put it over the area i was gonna drill and sealed it up. next i took duck tape and taped the inside of the tank in the area the hole would be. (so the piece of glass didn't fall and hit the other side)
PIC00008.jpg

next pour a little water into the cup so that way you will always have collent to your bit. as for starting the hole i found it is easier to start the drill at a little angle and hold the drill tight or it will move all over the place on you but once you get the hang of it, it is easy. as soon as you got a little cut away from the angle cut you can then start to ease the drill up so it is straight up and down from your glass. (by the way do not apply pressure while drilling as you will crack the glass just let the weight of the drill do the cutting for you). after drilling for a bit and you notice the water is getting a milky color i stopped and took a turkey baster and sucked all the water out and the glass shavings and replaced it with clean water. (that will be so you don't keep using the glass shavings in your bit i am sure it will dull your bit faster)just keep doing that till your all the way through. and here is the outcome.
PIC00010.jpg


i hope this helped you all out and ask anymore questions if your still confused about anything
 
Word of advice - when plumbing the pipes for the bulkheads - be sure to allow for a settling of the tank due to the weight of the water. When I plumbed up my 90 - I had the pvc really tight - because that's the way I always did it when building pools.

When I added water, the weight settled the floor, tank and stand - but NOT the PVC plumbing that lead into the wall. Long thread and story short "CRACK"....
 
Jamesurq - thanks for the info i will keep that in mind

scuba oz - i can't take all the credit i read the cup part somewhere in a diff. thread but they didn't say to clean out the water every now and then to remove the glass shavings. (and also i think they used antifreeze, not sure if that worked any better) however i am not sure if you really need to but i just think it will make the bit last longer.
 
with the holes like that what happens if power goes out?
Click to expand...
if the power goes out the water stops flowing. i know it is hard to see now but i am ordering a acrylic corner overflow box to put in the right side corner of the tank and that will handle that bulkhead. so if the power goes out the water stops flowing over the overflow and therefore no flood. as for the middle hole that is for the closed loop i am hoping to do this weekend
 
closed loop

closed loop

ok next on my list of many was to start on my closed loop part so after many fusterating hours of tring to figure out which way would work best i came up with this finished idea.
here is the parts i picked up at bomgarrs:
PIC00001.jpg

next i went to town and started cutting and fitting all the parts together this was my first time really working with PVC but it was actually kind of fun. and here is the pic. of the finished product
finishedloop.jpg

although work was out of the locline so i will have to wait till i can get some more to finish putting them on but you can get the basic idea.
however maybe someone can help me out on this on: the closed loop will fit perfect inside the tank up around the top trim and i think it looks better there hoever the only way i can see that to work to get water to that is by using 3 90 elbows and that is gonna slow down my water alot so i am thinking that putting it on top of the tank like in the pic. is my only option. unless someone knows a better way of doing it. it isn't glued yet so i can still take it apart and adjust it as needed. any help on that part would be great and if anyone needs a pic. of what i am talking about when i mean inside the tank feel free to ask and i will get one taken.

thanks for looking and comments are very welcome:D
 
Is your pump for the closed loop gonna be on the outside or inside of the tank?

That looks really good btw.
 
the pump will be under the tank in the stand. still tring to determin what size to go with though.
That looks really good btw.
Click to expand...
thanks i was quite happy with it.

i still have to finish plumbing the 1 1/2 pvc down to where the pumps will be but i am gonna wait till i figure out where it will all go before i do any of that.
 
Get the largest utility pump you can and a ball valve. I tried using a RIO 3100 in my sump to return the water through a scwd but the height + the scwd was too much for the pump and I ended up having to put the setup inside the display..Very unhappy about that but I have to live with it now :(
 
You must log in or register to reply here.

Similar threads

W
Cycling new Tank
Replies
2
Views
375
C.Eymann
C.Eymann
Broken reefer
Alk and calcium
Replies
3
Views
830
Reefing102
Reefing102
JW Frink
New and researching
Replies
17
Views
996
JW Frink
JW Frink
A
New Naso Tang breathing heavy and not swimming much anymore
Replies
2
Views
400
griss
griss
P
50 Gallon Stocking Help
2
Replies
21
Views
945
Urka
U
Back
Top