silverA3
New member
Alright I'm to the point where I can start breaking down my 110G to sell. Still has water and sand in it, but as soon as I have a sure buyer, I'll drain it and bucket all the sand.
This is a 110G LeeMar tank that was purchased a little over 18 months ago from Discount Aquarium. It has a corner overflow with (2) 1" holes and a 3/4" hole. I had it setup with 1 return, 1 drain, and an emergency drain. It is 60.5" wide, 18.55" Deep, and 23.5" Tall. It also has 3 holes in the bottom for a closed loop setup. When it was initially purchased I planned on running a closed loop so replaced all the bulkheads. When I removed one of the bulkheads from the bottom of the tank I found the glass was chipped. I ended up having a piece of acrylic cut and siliconed over the hole.
Stand is a custom steel stand that was built so I could use a 40B as a sump so its a little wider than the tank itself. I planned on having it skinned and building a little shelf off the front to hold my beer while I looked at the tank, it just never happened. The tank was built tall so the tank is right at eye level, I'm 5'11" and its perfect. Stand measures 60.5" Wide, 40" Tall, and 22" Deep. There is a TON of space under the tank, its really nice. There are also leveling feet on the bottom of the stand.
The sump is a 40B with glass baffles. Starting from the left, the first compartment measures 14.5" Wide, 17.5" Deep, and the baffle is 9" tall. Second compartment is 12.5" Wide, 17.5" Deep, and the baffle is 10" tall. Next is a bubble trap and the 3rd compartment is 6" Wide, 17.5" Deep, and the baffle is 12" tall.
The other tank in the photo is my 14G LeeMar ATO container that I'm pretty sure is sold already, but can include it for another $20 if the first buyer decides to pass on it.
I believe that covers everything, sorry for going all life-story on you guys. Plumbing will be included as well if you want it as well as my Sicce 5 return pump.
Looking for get $300 for everything mentioned. You can reach me via PM or 520-456-6106. Thanks.
This is a 110G LeeMar tank that was purchased a little over 18 months ago from Discount Aquarium. It has a corner overflow with (2) 1" holes and a 3/4" hole. I had it setup with 1 return, 1 drain, and an emergency drain. It is 60.5" wide, 18.55" Deep, and 23.5" Tall. It also has 3 holes in the bottom for a closed loop setup. When it was initially purchased I planned on running a closed loop so replaced all the bulkheads. When I removed one of the bulkheads from the bottom of the tank I found the glass was chipped. I ended up having a piece of acrylic cut and siliconed over the hole.
Stand is a custom steel stand that was built so I could use a 40B as a sump so its a little wider than the tank itself. I planned on having it skinned and building a little shelf off the front to hold my beer while I looked at the tank, it just never happened. The tank was built tall so the tank is right at eye level, I'm 5'11" and its perfect. Stand measures 60.5" Wide, 40" Tall, and 22" Deep. There is a TON of space under the tank, its really nice. There are also leveling feet on the bottom of the stand.
The sump is a 40B with glass baffles. Starting from the left, the first compartment measures 14.5" Wide, 17.5" Deep, and the baffle is 9" tall. Second compartment is 12.5" Wide, 17.5" Deep, and the baffle is 10" tall. Next is a bubble trap and the 3rd compartment is 6" Wide, 17.5" Deep, and the baffle is 12" tall.
The other tank in the photo is my 14G LeeMar ATO container that I'm pretty sure is sold already, but can include it for another $20 if the first buyer decides to pass on it.
I believe that covers everything, sorry for going all life-story on you guys. Plumbing will be included as well if you want it as well as my Sicce 5 return pump.
Looking for get $300 for everything mentioned. You can reach me via PM or 520-456-6106. Thanks.
Last edited:
