nirvanaandtool
New member
Selling my now empty 16g acrylic cube setup. Combined it into my 40B and need to sell it to fund more stuff for my 90g build.
I'd like to find a local for this rather than attempt shipping this thing. Located in Mantua Twp, South Jersey (30mins out of Philly)
$275 OBO
- 16" x 16" x 16" Rimless acrylic cube - made with ½" thick acrylic. Works out to be around 15-16g. Made by Advanced Acrylics 2 years ago. Back is painted Black. There are a few light scratches from use but these can be polished out. Will provide Novus acrylic scratch remover & polish with tank
- Glass-holes Super Nano Overflow (w/ custom external durso) & ½" SCH80 Return
- 12" x 12" x 12" Mr. Aqua cube DIY sump (large fuge section, skimmer section fits a Tunze 9002, return sized for Mag 3)
- Mag 3 Return Pump w/ extra impeller
- DIY Stand made with 1x2's and skinned with half-inch ply. This stand is a beast. Needs a fresh coat of black paint but structurally it's a tank.
- DIY LED light - 2 Cree XRE NW/2 Cree XRE CW, 5 Cree XRE RB with two 1000mA Buckpuck drivers with External Pots on a 5x6" heatsink (Yes this is outdated but can be easily upgraded to newer LEDs). This light grew SPS with no problems.
Tank has been cleaned and is ready to be picked up.
Also have a Reef Angel standard controller available that I can throw in for $100.
Pics:
Display
Sump
LED light while building it. (Wires are all cleaned up now in Radioshack project boxes)
All empty now.
Sorry for some of the crappy pics, most are from my phone.
If you want to see any other pics of anything, just let me know.
Thanks!
-Ralph
I'd like to find a local for this rather than attempt shipping this thing. Located in Mantua Twp, South Jersey (30mins out of Philly)
$275 OBO
- 16" x 16" x 16" Rimless acrylic cube - made with ½" thick acrylic. Works out to be around 15-16g. Made by Advanced Acrylics 2 years ago. Back is painted Black. There are a few light scratches from use but these can be polished out. Will provide Novus acrylic scratch remover & polish with tank
- Glass-holes Super Nano Overflow (w/ custom external durso) & ½" SCH80 Return
- 12" x 12" x 12" Mr. Aqua cube DIY sump (large fuge section, skimmer section fits a Tunze 9002, return sized for Mag 3)
- Mag 3 Return Pump w/ extra impeller
- DIY Stand made with 1x2's and skinned with half-inch ply. This stand is a beast. Needs a fresh coat of black paint but structurally it's a tank.
- DIY LED light - 2 Cree XRE NW/2 Cree XRE CW, 5 Cree XRE RB with two 1000mA Buckpuck drivers with External Pots on a 5x6" heatsink (Yes this is outdated but can be easily upgraded to newer LEDs). This light grew SPS with no problems.
Tank has been cleaned and is ready to be picked up.
Also have a Reef Angel standard controller available that I can throw in for $100.
Pics:
Display
Sump
LED light while building it. (Wires are all cleaned up now in Radioshack project boxes)
All empty now.
Sorry for some of the crappy pics, most are from my phone.
If you want to see any other pics of anything, just let me know.
Thanks!
-Ralph
