ArmanS
Active member
Selling some equipment to help buy some new toys for the new 540g build that I am doing. Everything is cleaned up and ready to go! Pickup in Signal Hill, 90755 Monday - Saturday 9-6:30!
I answer PMs quickly but you can also text if you prefer that at 562 / 310 / 2449.
To view tons of photos view my photobucket library at ; http://s787.photobucket.com/user/armanslr/library/?sort=3&page=1
Here we go;
Red Sea S 650 Complete Tank, Stand, T5 Light, Sump, Cabinet, Plumbing, Return Pump, ATO, & Circulation Pumps. $2,500
Lights are 8 x 80w T5 in a very nice enclosure that matches the aquarium's stand. Bulbs have 8 months use on them.
Sump is a the sump that is included with the system, includes a ATO which is just a Reservoir built into the back of the tank + a float valve. Includes return pump, plumbing, and 4 closed loop / circulation pumps in the back. I cleaned the tank thoroughly and it is ready to go. It is built extremely well and looks great. Comes with an Aluminum Stand as well. The tank and stand is ~3 years old. Everything is used but in good condition. The tank has 1 chip in the rear corner that occurred in transit when I purchased it new. It is not a big deal because it is in the far corner of the overflow area. Here are some pics, first is a pic of what the whole system looks when put together with cabinet, lights, and trim.
JBJ 1/3HP Chiller. $450 Used for 1.5 years, runs great, it is slightly louder now then when it was new on startup but I have never had any issues with it, great chiller and for the price you can't beat it.
Neptune Wav Kit $350 ~8 months old. Excellent pumps, I think these are much quieter then the MP40 QDs and require less frequent cleanings. Comes with 1 Link Module, Power Supply, 2 Wav Pumps, Aquabus Cable, Box etc.
Custom Advanced Acrylics Sump $850 66"x30"x18" Made of 3/4" Acrylic and 1/2" Euro Brace. White Back, bottom, sides, and euro brace. The front is clear acrylic. The Euro Brace makes it look much nicer then any standard sump and has tons of holes for bulk heads or for running wires to have a very clean setup. The first section is the drain area, there are holes for 1.5" and 1" and 3/4" bulkheads. That section is 12"x30" and drains into 5 x 4" filter socks. The next chamber is 20"x30" and has an adjustable baffle, and 3 x heater holders. The next chamber is 20"x30" and has 6 x 1/2" holes that you can use JG fittings and use for 1/4" tubing or anything that you choose. Then the return is 14"x30". This is a monster of a sump and great for anyone who is planning a large system and wants tons of flexibility.
I answer PMs quickly but you can also text if you prefer that at 562 / 310 / 2449.
To view tons of photos view my photobucket library at ; http://s787.photobucket.com/user/armanslr/library/?sort=3&page=1
Here we go;
Red Sea S 650 Complete Tank, Stand, T5 Light, Sump, Cabinet, Plumbing, Return Pump, ATO, & Circulation Pumps. $2,500
Lights are 8 x 80w T5 in a very nice enclosure that matches the aquarium's stand. Bulbs have 8 months use on them.
Sump is a the sump that is included with the system, includes a ATO which is just a Reservoir built into the back of the tank + a float valve. Includes return pump, plumbing, and 4 closed loop / circulation pumps in the back. I cleaned the tank thoroughly and it is ready to go. It is built extremely well and looks great. Comes with an Aluminum Stand as well. The tank and stand is ~3 years old. Everything is used but in good condition. The tank has 1 chip in the rear corner that occurred in transit when I purchased it new. It is not a big deal because it is in the far corner of the overflow area. Here are some pics, first is a pic of what the whole system looks when put together with cabinet, lights, and trim.
JBJ 1/3HP Chiller. $450 Used for 1.5 years, runs great, it is slightly louder now then when it was new on startup but I have never had any issues with it, great chiller and for the price you can't beat it.
Neptune Wav Kit $350 ~8 months old. Excellent pumps, I think these are much quieter then the MP40 QDs and require less frequent cleanings. Comes with 1 Link Module, Power Supply, 2 Wav Pumps, Aquabus Cable, Box etc.
Custom Advanced Acrylics Sump $850 66"x30"x18" Made of 3/4" Acrylic and 1/2" Euro Brace. White Back, bottom, sides, and euro brace. The front is clear acrylic. The Euro Brace makes it look much nicer then any standard sump and has tons of holes for bulk heads or for running wires to have a very clean setup. The first section is the drain area, there are holes for 1.5" and 1" and 3/4" bulkheads. That section is 12"x30" and drains into 5 x 4" filter socks. The next chamber is 20"x30" and has an adjustable baffle, and 3 x heater holders. The next chamber is 20"x30" and has 6 x 1/2" holes that you can use JG fittings and use for 1/4" tubing or anything that you choose. Then the return is 14"x30". This is a monster of a sump and great for anyone who is planning a large system and wants tons of flexibility.