FS - 300 Gallon Tank/Stand/Hood/Sump/Pump

janes_mw

Active member
Finally got around to cleaning up the 300 gallon and posting for sale.

96" Long, 30" Tall, 24" deep
Acrylic 3/4" thick
Rear Overflows to Sump Below
Rock Wall Freshly coated with Aragonite
Hood (no Lights)
Stand 34" tall
Sump - I think 48" x 18" x 20 ", Siphon box built in, two filter socks, Water Adder tank (about 5 Gallons), plenty of room for big skimmer (I had a BK250 in there).
Return Pump - Fluval SEA SP 6 (Great Pump)
300W Heater
30-40 25 micron socks
All plumbing in tact and uses quick connect unions.

Basically, plug and play after you add your skimmer, lights, and wave makers.

Tank alone new is $2200, Pump is $250, Sump is $450 ....... blah!

$1500, Come take a look!!!







 
Last edited:
Now that you've sold, I have to ask: what is this siphon box you speak of in your sump?

Ted, it's just where the returns from the bean siphons dumped into the sump under the valves. It was sealed from the rest of the sump (except the top where it dumped into the socks) where as the return pipes were always submerged in about 2" of water to insure they were always in a consistent level of water. So in lieu of the returns just dumping into the filter socks, they were always submerged. Siphon box might not be the correct term although, just was following the Bean Animal design. A picture would probably be better :). PM me if you want to see my drawing of the sump return area.

mike
 
Back
Top