FS: 440 gal acrylic tank- MUST GO!

[dgasmd]

I have this tank I bought to actually use as my sump for a large system I had, but I never ended up using it. It is in fantastic shape, although as any acrylic tank, it does have some very minor scratches here and there that can easily be taken out.
Tank is 8'Lx3'Dx2.5'T in 3/4" has a center brace along with bracing along the top edge. Has 2 large overflows in black, one on each end with several holes for plumbing. Bulkheads in place. The tank was designed to be placed between 2 rooms by the previous owner, so the long lanes are the viable sides.

I need this gone from my garage. First $400 takes it home. You must pick up, but I'll help load it. No stand available. Located in Vero Beach, FL

**Tons of other large equipment available too and will post it later.
**Poor picture due to being in a very full garage!

 

[rovster]

Damn dream dimensions!

 

[dgasmd]

Again, this was going to be the new sump for my 10'x4'x30" sps tank. Dream do vary and change. My dream now would be a 4'x4'x2' semi cube that is partially under direct sun for a few hr/day!! However, between family and other lifestyle changes I no longer have the time and inclination/desire to start a reef tank. Maybe in the future, but the equipment has been sitting there idle occupying room in my garage that I could use otherwise. Not to mention someone else could be using it for what it was intended instead. At this point, I just want this stuff out of there LOL.....

 

[Porscheflyer]

Pm sent

Sent from my SM-N910V using Tapatalk

 

[Diesel3443]

Blast from the past! I still remember you're behemoth in Royal Palm


Sent from my iPhone using Tapatalk

 

[mrx66699]

pm sent

 

[dgasmd]

For all of those that have asked me:

1. No bad scratches or gouges. Just a few faint scratches like any acrylic tank after about 2 months of use really. Was a FO tank before, which helped with that. I wanted it for a system sump, but liked the fact that had no scratches in case I wanted to set it up separate. No craze either. Does need to be cleaned inside and out though

2. Each "skimming/drain box on the ends have 2 returns aiming along the length of the tank. Almost positive they are 1" at least. The bottom of the boxes have I believe (at least) 1.5" drains x 2 in each box. All bulkheads in place in all of them btw.

3. Other equipment:
6' tall custom made skimmer with needle wheel pump. This thing can easily outskim a 3000 gal system (no joke or exaggeration). Had it on a timer as I only had a heavily stocked 1200 gal system. Have 5 large 5000gal/hr pumps, 5 lumen act reflectors, 2 large media reactors (have to measure dimensions for accuracy) 36"T x 6 or 8" diameter, huge custom made ca reactor with pump, 450 lb of large Tonga branch rock dry and bleached out, 55 g plastic drum, and a million other things I will sort through once I get the tank out of the garage and make room.

 

[tattoosandfrags]

That skimmer is bigger then me yikes lol glws

 

[Reel North]

Would you ship?

 

[mrx66699]

already picked up......

 

[jose521]

What is picked up and what is for sale?

 

[dgasmd]

I will update what is available later today or tonight when I get a chance.

 

[mrx66699]

Picked up the tank and reactors plumbing pumps skimmer and tonga

Sent from the Sunrise SeAquarium

 

[McGee10]

Picked up the tank and reactors plumbing pumps skimmer and tonga

Sent from the Sunrise SeAquarium

But you already have a Nano!

 

[mrx66699]

Lol it was for my good friend

Sent from my SM-G900P using Tapatalk