eums
New member
I'm looking to get rid of everything, not part it out. $1500 for everything.
Pickup in Hawthorne (405 & 105)
90g Custom 1" thick acrylic 36x24x24 rimless w/external overflow box, was set up for less than a year. no gouges. on a maple stand, custom made shaker style
Vertex Illumina 360 with 3x additional red LED pads (one red pad is not lighting up, needs firmware update/flash hasn't been updated in over 2.5 years)
Apex Aqua Controller
Screen still has the original protective plastic
2x Energy Bar 8's
AquaSurf with 4x sets of cables (controls the tunze 6055 and wave controller)
Temperature Probe
Breakout box
Original USB and Ethernet cables
PH probe (old and dry, thrown away)
ATB 840
Original box, used for less than a year.
Tunze Stuff:
6055 x2 with power adapters
6105 used for mixing salt only, cant find the power adapter
6206 Nano wave box, top grate is missing and a small chip on the top of the unit, does not effect functionality.
5017 water level controller(auto top off)
1073.020_a (return pump lower gph)
ATB flowstar 1500 (return pump, higher gph option)
5lb CO2 alu cylinder with smith regulator, needle valve, check valve, solenoid, and bubble counter
Clear for life sump
Algae scrubber, needs new plastic knitting screen.
Heaters: 250W, 200W, 150W
Some other Misc stuff like co2 tubing, digital ALK tester, air pump, BRS supplements.
Pickup in Hawthorne (405 & 105)
90g Custom 1" thick acrylic 36x24x24 rimless w/external overflow box, was set up for less than a year. no gouges. on a maple stand, custom made shaker style
Vertex Illumina 360 with 3x additional red LED pads (one red pad is not lighting up, needs firmware update/flash hasn't been updated in over 2.5 years)
Apex Aqua Controller
Screen still has the original protective plastic
2x Energy Bar 8's
AquaSurf with 4x sets of cables (controls the tunze 6055 and wave controller)
Temperature Probe
Breakout box
Original USB and Ethernet cables
PH probe (old and dry, thrown away)
ATB 840
Original box, used for less than a year.
Tunze Stuff:
6055 x2 with power adapters
6105 used for mixing salt only, cant find the power adapter
6206 Nano wave box, top grate is missing and a small chip on the top of the unit, does not effect functionality.
5017 water level controller(auto top off)
1073.020_a (return pump lower gph)
ATB flowstar 1500 (return pump, higher gph option)
5lb CO2 alu cylinder with smith regulator, needle valve, check valve, solenoid, and bubble counter
Clear for life sump
Algae scrubber, needs new plastic knitting screen.
Heaters: 250W, 200W, 150W
Some other Misc stuff like co2 tubing, digital ALK tester, air pump, BRS supplements.
