bdevillier
New member
back at the beginning of august i moved and upgraded my 20 long to a larger tank. since then the tank has been sitting in my garage and i need to get things cleaned up so the tank needs to go.
the tank is an AGA 20 gallon long, drilled for a 700GPH g-holes overflow (1 1/2" drain) and 2 returns. the overflow is top center of the back wall and a return in each top corner of the back wall. the returns are plumbed with 3/4" pvc up to the bulk head which then is reduced to 1/2" for the bulkheads. also comes with mesh screen cover to prevent carpet surfers.
the sump is a standard 10 gallon DIY, with 1/4" glass baffles and 3 chambers. one thing to note is the baffles are at a slight angle do to a screw up by the glass shop. i didnt feel like waiting for them to cut new ones so i lived with it.
the stand i built myself and is made of 2x2 dimensional lumber and 1/2" MDF. the bottom of the stand has been lined with plastic sheeting and sealed with silicone to help safe guard against spills. the stand has been primed with kilz inside and out and was left at that (i liked the look of the flat white). there is also a built in shelf inside the stand directly below the tank for electronics and 2 light hanging arms mounted to the back of the stand for lights that cannot be mounted to the tank itself. will also throw in the ATO container shown in the pic.
for tank, stand, sump, and all related plumbing i'm asking $100.
also for sale is the AquaticLife 4x24W t5 with built in timers and moon lights. current bulbs are 2 blue+, 1 purple+, and 1 UVL super actinic (about 9 months of use) and one of the moonlights works part of the time but can be replaced for $16 (http://www.aquaticlife.com/store/1367/1369)
asking $120 for the light
fell free to pm or text with any questions, thanks
Brian 951-941-three5six0
the tank is an AGA 20 gallon long, drilled for a 700GPH g-holes overflow (1 1/2" drain) and 2 returns. the overflow is top center of the back wall and a return in each top corner of the back wall. the returns are plumbed with 3/4" pvc up to the bulk head which then is reduced to 1/2" for the bulkheads. also comes with mesh screen cover to prevent carpet surfers.
the sump is a standard 10 gallon DIY, with 1/4" glass baffles and 3 chambers. one thing to note is the baffles are at a slight angle do to a screw up by the glass shop. i didnt feel like waiting for them to cut new ones so i lived with it.
the stand i built myself and is made of 2x2 dimensional lumber and 1/2" MDF. the bottom of the stand has been lined with plastic sheeting and sealed with silicone to help safe guard against spills. the stand has been primed with kilz inside and out and was left at that (i liked the look of the flat white). there is also a built in shelf inside the stand directly below the tank for electronics and 2 light hanging arms mounted to the back of the stand for lights that cannot be mounted to the tank itself. will also throw in the ATO container shown in the pic.
for tank, stand, sump, and all related plumbing i'm asking $100.
also for sale is the AquaticLife 4x24W t5 with built in timers and moon lights. current bulbs are 2 blue+, 1 purple+, and 1 UVL super actinic (about 9 months of use) and one of the moonlights works part of the time but can be replaced for $16 (http://www.aquaticlife.com/store/1367/1369)
asking $120 for the light
fell free to pm or text with any questions, thanks
Brian 951-941-three5six0
