FS skimmer, lights, pumps, OM

[rxx2]

All items can be picked up in San Mateo. I also work in Hayward on Wednesdays and in SF on various days and you can pick up at either place if you'd like.

Here goes:

Aqua C EV-180, Eheim 1262, DIY auto waste collector, $150.

Ampmaster 3000 with the abrasive seal, $125.

Sequence 1000 series 5000 GPH saltwater seals, $200.

OM 4-way, version 2 drum, updated with the mag drive, you may need to get a few new fittings if you don't like how I plumbed it, $200.

I have 3 double ended 250 watt setups. They are all plug and play, RO III pendants:
One is run by an ice cap
One is run by a PFO
One is run by a SLS
They all need to have the bulbs changed out as they have been in there about a year.
I'd like to get $100 for each set up.

I have a 4 bulb VHO setup run on an ice cap 660, with end caps, standoffs, I even have some 36 inch reflectors, 2 single and 1 double bulb. I'd like to get $100.

I have a 4 bulb T5 setup run on an ice cap 660, end caps, standoffs, reflectors. I'd like to get $140.

Iwaki MX-70VT-15L, this is not your mother's Iwaki, got it from Customaqautic on this page:
http://www.customaquatic.com/customaquatic/subsubcategorypage.asp?subcatindexid=wp-aq-md $175

I think I have 2 Mag 9.5's with a spare impeller, $50.

3 120mm case fans wired to a radio shack 1.5 amp dc converter, $30.

Thanks,
Ben

 

[dannieboiz]

dibs on 4 way

 

[orientalexpress]

Aqua C EV-180, Eheim 1262, DIY auto waste collector, $150,this is cheap guy,the ehiem itself cost 129.00 brand new
gl



lapsan

 

[orientalexpress]

here the pump list at http://www.marinedepot.com/md_viewItem.asp?idproduct=EH1262


lapsan

 

[dannieboiz]

yah it's a great deal for a great skimmer. Too bad I already have one or else I'd jump all over this deal.

 

[bladze]

Sent you PM on the following:

Aqua C EV-180, Eheim 1262, DIY auto waste collector, $150.

I have 3 double ended 250 watt setups. They are all plug and play, RO III pendants:
One is run by an ice cap
One is run by a PFO
One is run by a SLS
They all need to have the bulbs changed out as they have been in there about a year.
I'd like to get $100 for each set up.

Thanks.

 

[rxx2]

Yeah, thanks o-express. I thought it was a bargain at 250 then 200 for the whole setup but no bites.
Gotta move this stuff out though.

 

[rxx2]

Ice Cap 250 watt setup and Mag 9.5's are sold.

 

[rxx2]

I also have an Ice Cap 150 watt HQI ballast, you can have the PFO DE 150 watt pendant, it has a lot of salt creep on it both for $50.

Also have an Ice Cap 3000 electronic ballast, will come with 2 sets of T-12 (VHO) waterproof endcaps. I'll throw in a Workhorse 5 ballast, I've never hooked it up, it has a dent in the case I don't know if it works but you can have it also, all for $25.

 

[dannieboiz]

I know someone who may want the 150w HQI setup..

 

[maynor]

Thank you Ben!

I have been to Ben's place before and he is a great person to deal with. He takes good care of his equipment and if there is something you need to know, he will be honest with you, so you will not be dissapointed with anything you buy from him. Just my two cents.

Hope you all have a great day!

 

[wakskat]

PM about 150W icecap ballast

Thanks,

mark

 

[mnguyen878]

Are the other 2 DE setups sold? If not, I'll take them.....if you ship of course.

YGPM

THanks,

Mike

 

[goslugsgo]

How old is the 4 bulb VHO setup run on an ice cap 660, with end caps, standoffs, I even have some 36 inch reflectors, 2 single and 1 double bulb?

 

[rxx2]

dannieboiz here are the pics of the OM

 

[dannieboiz]

perfect. Just wat I needed.

 

[rxx2]

Here's what's left:

Ampmaster 3000 with the abrasive seal, $125.

Sequence 1000 series 5000 GPH saltwater seals, $200.

I have a 4 bulb VHO setup run on an ice cap 660, with end caps, standoffs, I even have some 36 inch reflectors, 2 single and 1 double bulb. I'd like to get $100.

Iwaki MX-70VT-15L, this is not your mother's Iwaki, got it from Customaqautic on this page:
http://www.customaquatic.com/custom...ndexid=wp-aq-md $175

OM 4-way, version 2 drum, updated with the mag drive, you may need to get a few new fittings if you don't like how I plumbed it, $200-pending to dannieboiz


Thanks to all who have come by,
Ben

 

[nasotang]

I'm interested in the sequence pump. Do you have a picture of the unit?

 

[rxx2]

It's the pump in the above pic, the second one.