dja1980
Active member
Coralvue 400w MH Dimmable Electronic Ballasts - $50 & $30 (non-dimmable)
I have a pair of these. They are dimmable down to -35% or can overdrive up to +10%. You can adjust the range anywhere from 260w to 440w using the knob. However, on one of the ballasts the dimmer no longer works, which causes the bulb to be underdriven (burns bluer). This might be fixable, but I’ve discounted for the non-dimmable ballast. Both cooling fans have recently been replaced, and I am also including extra fans for future replacements.
http://www.aquariumplants.com/Coralvue_Electronic_Halide_Ballast_Dimmable_400_W_p/vue40400d.htm
JBJ 70w MH Viper Light - $80
This is in great shape, but is ready for a new bulb. I was using this to light my frag tank.
http://www.aquacave.com/JBJ-70W-K-2-Viper-HQI-Fixture-P1888C256.aspx
Borneman 7g Surge - $20
This was built using a 28 quart Rubbermaid wastebasket. It was never used due to space constraints.
Hanna Low-Range Phosphate Colorimeter HI93713 - $100
This was only used a handful of times. I ended up with 2 of them when I took over my parents’ tank maintenance.
http://www.marinedepot.com/Hanna_In...ums-Hanna_Instruments-HN1195-FITEMOID-vi.html
Rio 1700 642gph Pump - $30
This was used for about 3 months as the main circulation pump on my 24g Nano Cube before I drilled the tank and went with an external pump. It is the most GPH pump I could find that would fit in the rear chambers.
http://www.marinedepot.com/Taam_Rio...ds-TAAM_Via_Aqua-TA3111-FIPHFF-TA3148-vi.html
IOGear USB to Ethernet ShareStation GUIP204 - $30
This was used with my Reef Keeper Elite to convert USB to Ethernet so I could run myReef 2.0 over my home network. It will accept 4 USB devices to be shared over an Ehternet connection. You can also use this for a reef webcam.
http://www.iogear.com/product/GUIP204/
Serial to Bluetooth Adapter GBS301 & Bluetooth Receiver GBU311 - $30
These were used with my Reef Keeper 2 to convert Serial to Bluetooth so I could run myReef 1.0 wirelessly.
http://www.iogear.com/product/GBS301/
http://www.iogear.com/product/GBU311/
I have a pair of these. They are dimmable down to -35% or can overdrive up to +10%. You can adjust the range anywhere from 260w to 440w using the knob. However, on one of the ballasts the dimmer no longer works, which causes the bulb to be underdriven (burns bluer). This might be fixable, but I’ve discounted for the non-dimmable ballast. Both cooling fans have recently been replaced, and I am also including extra fans for future replacements.
http://www.aquariumplants.com/Coralvue_Electronic_Halide_Ballast_Dimmable_400_W_p/vue40400d.htm
JBJ 70w MH Viper Light - $80
This is in great shape, but is ready for a new bulb. I was using this to light my frag tank.
http://www.aquacave.com/JBJ-70W-K-2-Viper-HQI-Fixture-P1888C256.aspx
Borneman 7g Surge - $20
This was built using a 28 quart Rubbermaid wastebasket. It was never used due to space constraints.
Hanna Low-Range Phosphate Colorimeter HI93713 - $100
This was only used a handful of times. I ended up with 2 of them when I took over my parents’ tank maintenance.
http://www.marinedepot.com/Hanna_In...ums-Hanna_Instruments-HN1195-FITEMOID-vi.html
Rio 1700 642gph Pump - $30
This was used for about 3 months as the main circulation pump on my 24g Nano Cube before I drilled the tank and went with an external pump. It is the most GPH pump I could find that would fit in the rear chambers.
http://www.marinedepot.com/Taam_Rio...ds-TAAM_Via_Aqua-TA3111-FIPHFF-TA3148-vi.html
IOGear USB to Ethernet ShareStation GUIP204 - $30
This was used with my Reef Keeper Elite to convert USB to Ethernet so I could run myReef 2.0 over my home network. It will accept 4 USB devices to be shared over an Ehternet connection. You can also use this for a reef webcam.
http://www.iogear.com/product/GUIP204/
Serial to Bluetooth Adapter GBS301 & Bluetooth Receiver GBU311 - $30
These were used with my Reef Keeper 2 to convert Serial to Bluetooth so I could run myReef 1.0 wirelessly.
http://www.iogear.com/product/GBS301/
http://www.iogear.com/product/GBU311/
