FS: tank, diy led panels, dry rock

[nstiesi]

I used to be a regular here for a time, but I tore down about 2 years back when my son was born and I moved to boca. I kept a few things thinking that I may get the bug again, but it's looking like it will be quite a while....and if that time comes, I may want to go a different route anyway. I need garage room for other pursuits.

1. 75g standard tank, glass only. It is drilled with three holes for 1" plumbing, but is drilled on short side for use as peninsula. Comes with bulkheads, and I have a bunch of unions and Union valves, but it's not turn key. Also no overflow box. $50 obo

2. 50+ lbs of dry rock. Some I bought live, some was Marco rocks, all is dead now. After tear down I let it die and dry in closed brute. It is drilled for pegging.

3. My diy LEDs. Built these a few years before tear down. Was plenty of light for my rbtas, which thrived under them. Don't remember the specs but can look them up tonight. Two panels set up identically. Drivers can drive one or both in series. All 3w emitters, 6 different colors. Most were crees, some luxeon I think. Each color string can be dimmed individually, manually with knob or programmed via arduino. I have all the drivers, and some spares, and the DC power supplies. Arduino is missing though. I confirmed the leds run very cool with temp probes soldered on back when i built it, evem woth no fans. The housing itself is a big heat sink. It's a bit project, but I'll let it go cheap. $200 obo. The LEDs alone were $500 when I bought them.

I'm on my phone now, I can get pics and more specs on everything tonight if there is any interest. Could also probably look up some of my old threads. Thanks!

Nick

 

[nstiesi]

Some pictures:

The panels at full power. They can dim with a resolution of 255 (levels of brightness).

The guts. No longer mounted on panels and missing the arduino board (I have the code still). The small black bricks are Meanwell LDD constant current drivers. The open frame power supplies are 36v units run in parallel. The box with 6 knobs can manually dim each color.

Total LED count and color is (divide by 2 for each panel)
CREE XP-E Blue 3W LED x6
CREE XP-G 5W Neutral White LED x8
CREE XP-G R5 5W Cool White LED x8
CREE XT-E Royal Blue LED RB-XTE-CREE x12
Philips Rebel Cyan 3W LED CY-3W x6
Violet UV 3W LED UV-LED-420 x8

All leds have white plastic reflectors on them, wide angle. Can easily be removed and replaced with lenses.

Correction to my original post, my total cost was ~$500, the LEDs alone were ~$250. I'll drop my asking price to $150 obo.

The tank is a standard 75, I dont have a current picture. Here is a picture from when new, to show where it is drilled. It was only in use for ~5 years.

 

[nstiesi]

The tank is the big space taker.....make an offer, I need it gone.

Also forgot to price the rock.....$25 or free to the tank buyer.

 

[nstiesi]

Sold!