NanoClown
New member
Tunze 9002, I have had this for years. I last used it a few months ago on a holding tank that did not have a sump. It is UGLY because I had to mount the magnet on the side of it for it to fit on my RSM. I spilled a bunch of super glue and tried to clean it up. This skimmer still works like a champ and I would recommend it for systems under 40 gallons
$45
Current USA Orbit Marine LED 18-24"
Bought it new in April 2014, I used it from then up until August 2014. During this time I did drop it in my tank once and as a result 3 leds are burned out. It does not affect the functionality of the fixture. It has a few watermarks here and there. I paid around 150 for it. They go for 120 now.
$70
DIY LED - It has authentic CREE Leds, I'm not too sure of the exact colors or specs but I do know that it has one blue array and one white. It is controlled via an ALC for RK devices and an ALC is included in the sale. It has 2 meanwell drivers and an external power source for the fans. It also comes with a metal arm to hang it over an aquarium. You could figure out a way to mount it to your stand :spin1: Im no LED guru, but it is a nice fixture and I hope somebody could put it to use.
$75
AC 110 filter is very ugly (super glue spills!) and could use a new impeller (the current one has 3 fins shaved down so it is a very slow pull. It works but if you want more flow I would suggest replacing it). The lit is also slightly chipped. It should be modded for a refugium.
$30
RK - Float switch kit, self explanatory. I have a Tunze ATO so I have no use for this anymore.
$10
Koralia 1 with the gate mod. I am now using a Jebao RW4 so I dont have any use for it. Works great, pushes a little more flow with the gate mod.
$10
I also have a Fluval Spec V with one of the long sides painted black. DIY egg crate media rack, and a Minijet 606 pump (rare pump now that they are no longer being produced and it is one of the few that fit in the rear chamber), and the stock pump for a little extra circulation. There are a few scratches here and there, but this would make a great beginner tank with the Current USA light.
$50
Buy it together with the light for $100
$45
Current USA Orbit Marine LED 18-24"
Bought it new in April 2014, I used it from then up until August 2014. During this time I did drop it in my tank once and as a result 3 leds are burned out. It does not affect the functionality of the fixture. It has a few watermarks here and there. I paid around 150 for it. They go for 120 now.
$70
DIY LED - It has authentic CREE Leds, I'm not too sure of the exact colors or specs but I do know that it has one blue array and one white. It is controlled via an ALC for RK devices and an ALC is included in the sale. It has 2 meanwell drivers and an external power source for the fans. It also comes with a metal arm to hang it over an aquarium. You could figure out a way to mount it to your stand :spin1: Im no LED guru, but it is a nice fixture and I hope somebody could put it to use.
$75
AC 110 filter is very ugly (super glue spills!) and could use a new impeller (the current one has 3 fins shaved down so it is a very slow pull. It works but if you want more flow I would suggest replacing it). The lit is also slightly chipped. It should be modded for a refugium.
$30
RK - Float switch kit, self explanatory. I have a Tunze ATO so I have no use for this anymore.
$10
Koralia 1 with the gate mod. I am now using a Jebao RW4 so I dont have any use for it. Works great, pushes a little more flow with the gate mod.
$10
I also have a Fluval Spec V with one of the long sides painted black. DIY egg crate media rack, and a Minijet 606 pump (rare pump now that they are no longer being produced and it is one of the few that fit in the rear chamber), and the stock pump for a little extra circulation. There are a few scratches here and there, but this would make a great beginner tank with the Current USA light.
$50
Buy it together with the light for $100
