Furan 2 dosage instructions

[lee_d_m]

Hi,

I've just received 5 sachets of Furan 2 but no instructions. Does anyone have the dosage instructions available please

Thanks

Lee

 

[HumbleFish]

Directions for use: For best results, remove activated carbon or filter cartridge from filter and continue aeration. For each 10 gallons (38L) of water, empty one packet directly into aquarium. Repeat dose after 24 hours. Wait another 24 hours then change 25% of the aquarium water. Repeat this treatment for a second time, for a total of 4 doses. Then make a final 25% water change and add fresh activated carbon or replace filter cartridge. Treatment may be repeated, if necessary. Note: This medication will cause a slight discoloration of water which can be removed with activated carbon. This package treats up to 100 gallons. Four doses required for full course of treatment.

 

[lee_d_m]

Thank you !

 

[lee_d_m]

Can I just double-check on that dosage regime, is it:

day 1 = dose 1
day 2 = dose 2
day 3 = 25% WC plus dose 3
day 4 = dose 4

or

day 1 = dose 1
day 2 = dose 2
day 3 = 25% WC
day 4 = dose 3
day5 = dose 4

Thanks

Lee

 

[HumbleFish]

day 1 = dose 1
day 2 = dose 2
day 3 = 25% WC plus dose 3
day 4 = dose 4

^^This. Just to clarify, do the WC before administering the 3rd dose.

4 doses = one full course of treatment. You may run another full course (so, 4 more doses) if necessary; but I would do at least a 25% WC before beginning the second course.

 

[lee_d_m]

Ok great, thank you again

Lee