glass hole saw

[NaClH2Opgh]

I was looking for a 3/4" glass hole saw. I am going to drill a 29 gallon tank to use as a cryptic fuge for my new setup. Anyone have one I can use or know anywhere local that sells them before I order online?

Thanks

Paul

 

[jakesalk]

harbour freight has them cheep i believe

 

[chilly724]

I have one for a 1" bulk head if you want to go up a size.

 

[Masterderrull]

I have one for 3/4" bulkheads, but it's actual size is 28mm or 1.1". You can borrow it for free if you want. I'm in the valencia area, zip 16046.

 

[TomNeely]

I have the 3/4", 1" and 1.5".

Live in freedom or could bring to meeting

 

[NaClH2Opgh]

Thanks. I didn't even think about Harbor Freight. I will check there first tomorrow, it might be nice to have one around just in case. I have to drill a hole in the 225 for a return also anyways since I don't want to go over the rim. If not I will take one of you up on the offer to borrow one. thanks again!

 

[Raceimage]

Best Tile in Wexford, Lowes, Home Depot. Look in the flooring section if they aren't in the tool section.

 

[cloakerpoked]

You need a diamond coated hole saw...I don't think Lowes and Home Depot carry those do they?

 

[SirusX1721]

www.glass-holes.com is a great place. I've used them for a long time now and have been nothing but pleased. I had sizes from 3/4 - 2" if you would like to borrow some. Located near New Stanton.

 

[NaClH2Opgh]

You need a diamond coated hole saw...I don't think Lowes and Home Depot carry those do they?

I didn't find them in HD or Lowe's. Those were the first places I looked. I know Harbor freight has some other glass tools and stuff to work with glass so I will try it tomorrow.

 

[cloakerpoked]

I got mine off ebay. I think I paid like 7 dollars a piece for them or something. Mine are either too small or too large for your purposes though.

 

[vr697getta]

i think i have on around here somewhere. i used to drill my sump with. i will see if i can find it.

 

[NaClH2Opgh]

hole saw

hole saw

I got one at HD and it turned out to be the wrong size. It was 1 3/8" and it turns out you need a hole 1 7/16 to 1.5" according to savko. Harbor freight did not have any. I did find this site where they are cheap as hell. It's in Hong Kong but shipping was like $1.70 for standard (5-14 days).

http://richontools.com/index.php?main_page=index&cPath=1_5

Roland YGPM

 

[bmiller1234]

harbor freight has them online only.

 

[the2ofus]

I only have a 42mm.

I got mine here...http://www.bulkreefsupply.com/store/products/pumps-and-plumbing/plumbing-sumps-drill-bits-overflows-uniseals/diamond-coated-glass-drill-bits/35mm-diamond-coated-glass-drill-bit.html

I picked up the fittings also.

 

[NaClH2Opgh]

I only have a 42mm.

I got mine here...http://www.bulkreefsupply.com/store/products/pumps-and-plumbing/plumbing-sumps-drill-bits-overflows-uniseals/diamond-coated-glass-drill-bits/35mm-diamond-coated-glass-drill-bit.html

I picked up the fittings also.

That's a good price. HD wanted $21 for the one I took back.