help needed on placement of wavemaker !

[chercm]

i using a 4x2x2 tank but i need some advice on the placement of my wavemaker

i am using tunze 6100 and 6000 with a multi controller

pls help

 

[zachluhrs]

You want them to be on opposite ends of the tank not directly facing one another and try to get them at different levels. I would run the 6000 continuous duty (Maybe 60-80% power) and have the 6100 giving pulsing bursts. You'll have to play around with placement and power too achieve total circulation and try not to destroy the tank in the process. You could even try and hide one of them in the rockwork. Hope this helps some.

 

[chercm]

<a href=showthread.php?s=&postid=9405364#post9405364 target=_blank>Originally posted</a> by zachluhrs
You want them to be on opposite ends of the tank not directly facing one another and try to get them at different levels. I would run the 6000 continuous duty (Maybe 60-80% power) and have the 6100 giving pulsing bursts. You'll have to play around with placement and power too achieve total circulation and try not to destroy the tank in the process. You could even try and hide one of them in the rockwork. Hope this helps some.

thanks bro for your advice

here is the pic of the new placement

 

[chercm]

any comments?

 

[zachluhrs]

How's the flow working out for you?

 

[chercm]

<a href=showthread.php?s=&postid=9443782#post9443782 target=_blank>Originally posted</a> by zachluhrs
How's the flow working out for you?

seems ok but i am afraid that the right hand side wave maker might fall off