Help Setting 7095

[stevem650]

Roger
For my tank in a previous post you suggested to set my 7095 at Interval 2, pulse pump from 30% to 100% with a 3 hr interval. My tank is a 150 with 2-6000's. I'm not sure it's set right.
I do have it on interval 2. On the left of that is a pulse dial. What should that be set at? Dial 3 is at 3hr with the 4 led at 2-12hr. 1a and 2a are set at min. and 1b and 2b are set at 100%. Is this the proper setting? Im not sure if the pulse and dial 3 is set right. My pumps are plugged into 1.1 and 2.1

I do want to say that this controller is great. Im using the moonlight and night mode. When my lights go out the pumps do cut down flow and the moonlight gives a nice effect. The controller was worth the wait. Thanks

 

[rvitko]

Everything sounds correct. The Pulse knob sets the number of seconds from 1a to 1b and 2a -2b. The range is 1-7 Seconds. I find 3 seconds is about ideal, it gives the pumps enough time to speed up and slow down and really pulse. If this isn't enough flow you might try one of the other modes, like Pulse or Interval I.