Help with Every Other Day code

kbriers

New member
My current code for my tunze pumps are...
Left Side-
Set Wave1
If Time 08:00 to 09:59 Then DuskDawn
If Time 10:00 to 17:00 Then Wave1
If Time 17:01 to 21:00 Then DuskDawn
If Time 21:01 to 07:59 Then Night
If Outlet Timer1 = ON Then LtFlush
If Outlet Timer2 = ON Then DuskDawn
If Outlet Timer3 = ON Then Wave2

Right Side-
Set Wave1
If Time 08:00 to 09:59 Then DuskDawn
If Time 10:00 to 17:00 Then Wave1
If Time 17:01 to 21:00 Then DuskDawn
If Time 21:01 to 07:59 Then OFF
If Outlet Timer1 = ON Then RtFlush
If Outlet Timer2 = ON Then DuskDawn
If Outlet Timer3 = ON Then Wave2

As of right now, I only have the Left pump turning on in Night mode between 10:01pm thru 7:59am and the Right pump just stays off.

What I would like to do is have the Left pump come on in Night mode on Mon,Wed,Fri,Sat only and have the Right side come on in Night mode on Sun,Tue,Thur.

Im not sure how to do the correct code for this and I was hoping you could help me out.

Thanks everyone.
 
My current code for my tunze pumps are...
Left Side-
Set Wave1
If Time 08:00 to 09:59 Then DuskDawn
If Time 10:00 to 17:00 Then Wave1
If Time 17:01 to 21:00 Then DuskDawn
If Time 21:01 to 07:59 Then Night
If Outlet Timer1 = ON Then LtFlush
If Outlet Timer2 = ON Then DuskDawn
If Outlet Timer3 = ON Then Wave2

Right Side-
Set Wave1
If Time 08:00 to 09:59 Then DuskDawn
If Time 10:00 to 17:00 Then Wave1
If Time 17:01 to 21:00 Then DuskDawn
If Time 21:01 to 07:59 Then OFF
If Outlet Timer1 = ON Then RtFlush
If Outlet Timer2 = ON Then DuskDawn
If Outlet Timer3 = ON Then Wave2

As of right now, I only have the Left pump turning on in Night mode between 10:01pm thru 7:59am and the Right pump just stays off.

What I would like to do is have the Left pump come on in Night mode on Mon,Wed,Fri,Sat only and have the Right side come on in Night mode on Sun,Tue,Thur.

Im not sure how to do the correct code for this and I was hoping you could help me out.

Thanks everyone.

In this programming code

Right Side-
Set Wave1
If Time 08:00 to 09:59 Then DuskDawn
If Time 10:00 to 17:00 Then Wave1
If Time 17:01 to 21:00 Then DuskDawn
If Time 21:01 to 07:59 Then OFF
If Outlet Timer1 = ON Then RtFlush
If Outlet Timer2 = ON Then DuskDawn
If Outlet Timer3 = ON Then Wave2

Going by your logic On the fifth line it says "if time 21:01 to 07:59 then off", the last statement should be "night", so the new line should be

If time 21:01 to 07:59 then night

And to set day of week let me get home and i will figure it out, brb

Sana
 
In this programming code

Right Side-
Set Wave1
If Time 08:00 to 09:59 Then DuskDawn
If Time 10:00 to 17:00 Then Wave1
If Time 17:01 to 21:00 Then DuskDawn
If Time 21:01 to 07:59 Then OFF
If Outlet Timer1 = ON Then RtFlush
If Outlet Timer2 = ON Then DuskDawn
If Outlet Timer3 = ON Then Wave2

Going by your logic On the fifth line it says "if time 21:01 to 07:59 then off", the last statement should be "night", so the new line should be

If time 21:01 to 07:59 then night

And to set day of week let me get home and i will figure it out, brb

Sana

Yeah, I was going to change it from off to night when I could get a code to alternate between the right and left side. I didn't want both pumps on in night mode at the same time.

Thanks a bunch.
 
With a little movement of lines

Left Side-
Set Wave1
If Time 21:01 to 07:59 Then Night
If DoW S-T-T-- then off
If Time 08:00 to 09:59 Then DuskDawn
If Time 10:00 to 17:00 Then Wave1
If Time 17:01 to 21:00 Then DuskDawn
If Outlet Timer1 = ON Then LtFlush
If Outlet Timer2 = ON Then DuskDawn
If Outlet Timer3 = ON Then Wave2

Right Side-
Set Wave1
If Time 21:01 to 07:59 Then Night
If DoW -M-W-FS then off
If Time 08:00 to 09:59 Then DuskDawn
If Time 10:00 to 17:00 Then Wave1
If Time 17:01 to 21:00 Then DuskDawn
If Outlet Timer1 = ON Then RtFlush
If Outlet Timer2 = ON Then DuskDawn
If Outlet Timer3 = ON Then Wave2

Hope it works, lol, did not have time to test

Sana.
 
Back
Top