HELP! with toadstool coral

[rooked]

two days ago it looked awesome! things happen fast.
All other corals fine parameters all ok, any ideas?
Thanks in advance

 

[Crkbaby]

it could be shedding which is common lots of soft corals keep there polyps retracted during it and can take awhile sometimes even a week or so.

 

[joshky]

it could be shedding which is common lots of soft corals keep there polyps retracted during it and can take awhile sometimes even a week or so.

+1 just shedding

Make sure it has plenty of flow so it speeds the shedding process up. If you have insufficient flow in your tank/where it's at, it will shed more often.

 

[rooked]

Thanks, fingers crossed. It seems to be deeper than shedding. Hope that's all it is.

 

[CoralBeauty13]

Had same problem.

Had same problem.

Mine is doing better. More flow and cleaning with turkey baster everyday. I was scared as mine is about 16in in diameter. Is is doing alot better now.

 

[justthewife]

Does it look like this?

Mine just got worse and worse until it died. It happened right after I added an Acro to the the tank. It started to slump over as well as getting holes in it that ended up going right through it. If I were to do over, I would have fragged it and kept the good parts. Never did really find out what went wrong with it. Hope yours doesn't do the same.

 

[Daniel62]

If it gets to bad, try cutting out the necrotic parts. this has worked for me in the past

 

[Mylesweaver]

to close to that hammer coral