rcmania
Im So Confused!
Ok, I wanted to delay my skimmer for when I feed and or do maintenance. I looked all over but finally found it and thought I would share it here. I currently have my feed pause delay for 600 sec and my maintenance delay for 60 secs.
NOTE: the blackout delay only works when the unit loses power.
So you will need 3 programable logics.
G1 FUNCTION is Delayed On INPUT 1 is Filter 1 (Set your desired time for feed pause)
G2 FUNCTION is Delayed On INPUT 1 is Maintenance (Inverted) (Set your desired time for maintenance)
G3 FUNCTION is prog logic 1 AND prog logic 2
Now in the sockets, set your skimmer socket for Prog logic 3
So to recap my settings
I hit FP and both return pump and skimmer shut off. After 10 mins my feed pause is over and my return pump turns back on. My skimmer doesnt turn back on for another 10 minutes after that.
I hit Maintenance and once again my pump and skimmer shut off. After 30 minutes when my return pump turns back on my skimmer stays shut off for an additional minute.
Hope this helps.
NOTE: the blackout delay only works when the unit loses power.
So you will need 3 programable logics.
G1 FUNCTION is Delayed On INPUT 1 is Filter 1 (Set your desired time for feed pause)
G2 FUNCTION is Delayed On INPUT 1 is Maintenance (Inverted) (Set your desired time for maintenance)
G3 FUNCTION is prog logic 1 AND prog logic 2
Now in the sockets, set your skimmer socket for Prog logic 3
So to recap my settings
I hit FP and both return pump and skimmer shut off. After 10 mins my feed pause is over and my return pump turns back on. My skimmer doesnt turn back on for another 10 minutes after that.
I hit Maintenance and once again my pump and skimmer shut off. After 30 minutes when my return pump turns back on my skimmer stays shut off for an additional minute.
Hope this helps.
