I am stuck....

reewik

Active member
Here is the goal: Connect my RO/DI unit to a Kalk Reactor. By doing this I have to add a float switch? to control the amount of topoff inthe sump.

I have a float switch how on earth do I hook all this together... i am so lost.

I understand how to connect the kalk reactor.. it is the float switch that has me.... How to I get the water from the cutoff valve wo the unit?
 
Last edited:
Are you trying to hook up your ro/di unit to your reactor that is hooked up to your disply tank. I always read that this was a no no. Bc you never know when they are going to work on the water lines down the road.
 
What I do is have a 5g bucket of water which feeds an aqualifter, which pushes the water into the bottom of my kalk reactor and out of the top into my tank. :) The Aqualifter won't siphon back and its only pushing freshwater, so it won't hurt the pump either. I've been doing this for about 2.5 years now with 0 issues. Works really well!

What kalk reactor do you have?

Brandon
 
Oh I see what you are doing now. I thought you was going to hookup the ro/di unit right your reactor/ display tank. Hows those frag doing take care of my babies.
 
What I do is have a 5g bucket of water which feeds an aqualifter, which pushes the water into the bottom of my kalk reactor and out of the top into my tank. :) The Aqualifter won't siphon back and its only pushing freshwater, so it won't hurt the pump either. I've been doing this for about 2.5 years now with 0 issues. Works really well!

What kalk reactor do you have?

Brandon

I thought you sold your tank. It shoudl say "I did this for 2.5 yrs" :frog:
 
Back
Top