illumina problem

[olemiss reb]

I have two 24" model 200 on different tanks that are randomly turning modules on and off. I tried re-uploading the expert program through the vlink, setting it to custom, and no program but it still turns the pods on and off at random. Firmware is 1631 which I believe is the most recent. Both have the same program uploaded on expert, not sure if they can interfere with one another

Ideas?

 

[olemiss reb]

both light fixtures pods go on and off at the same time. Pod #1 is always illuminated.Need to get this fixed before the ritteri gets upset.

 

[olemiss reb]

I inadvertently fixed it. I was sent a firmware update by another member which I screwed up loading. If this happens you are supposed to unplug the unit and hold down the second button from the right, whatever this did fixed both fixtures. Still curious as to the cause if anyone knows.

 

[Jeremy B.]

It sounds like the firmware update not loading correctly caused the problem for you?

 

[olemiss reb]

It started acting up before I tried updating the firmware. I tried to fix the problem by updating the firmware which I screwed up and had to reset the fixture. The reset seems to have fixed the problem.