mannydouhnut
New member
Hey there RC, I am doing a 3 tank in wall build that will all share the same filtration. I am going to plumb a 60g cube, a 200g extra tall, and a 75g standard. I will be plumbing them all into 2x Rubbermaid 100g stock tanks one will be a dedicated refugium and the other for strictly equipment. I will be running 2x ASM G2s and an Aquamedic Acone 1.5. I will also run a huge metal halide powered algae scrubber, a media reactor if need be, a dosing pump, and a DC12000 Return Pump. Not to mention all of the various Jebao pumps and 3 different sizes of Reefbreeders Photon LEDS I will be using for waterflow and illumination. I plan on keeping seahorses, brotulids, pipefish, and macroalgaes in the 60. The 75 will be an SPS dominant mixed reef. The 200 will be a LPS dominant reef tank with mainly stinging LPS corals and some of the smaller large angels like maybe a girdled angel as well as other reef safe with caution type of fish. The system will be setup before June. I have a lot of equipment and salt left to get together. The 200 has weird dimensions something like 40"×54"×24" don't quote me on that but that's close. Any input would be nice leave opinions down below.
