Jebao WP25 Information
- Thread starter Sacohen
- Start date
goofyreefer
Member
macboat
Nano simplicity
Wystan is never wrong! :celeb3:
What I heard is that Reef Angel bought stand alone pump with Jebao. However I am not sure if they are going to sell them with their own controllers or stand alone.
What we order or what they will sell comes with controller and is the magnet base.
Here is more confirmed info about size, from the picture, I believe these are accurate.
WP40 WP25
Body Diameter 94mm 70mm
Body Height 120mm 90mm
Output Diameter 58mm 40mm
And the maximum flow rate is 8000l/h (2100G/H), not previously said 3000l/h. Which based what we saw in the vid, makes more sense now.
evolutionZ
New member
looking good! im planning to replace my wp40 to a wp25.. producing toooooo much flow..
i am not normally a praying man, but i am praying this statement is correct haha
overkill1125
New member
I currently have a koralia 1200 and a 750 on a 50g.
Is the wp25 too much flow?
Is the wp25 too much flow?
Actually customer service is great. The LFS that's carrying it around here is taking care of all customer service in our area.
macboat
Nano simplicity
That might just be your LFS, not the manufacture. Not sure how to get customer service from manufacture since they are far far away.
You're right but what more can we ask for? I mean not everyone will do it but any problems that we have will get taken care of.
dougdstecklein
New member
Has Wystan said anything about having the ability to dial down the wp25 or will we have to purchase a variable voltage power supply to do that?
Sacohen
New member
Yes. He told me that they were adding a speed control to the controller on the WP25.
This was a while ago when they were still in the testing phase, so who know the final product will be when it is release.
I have another e-mail into him to confirm what he has told me in the past and the fact that it is in production now and should be release soon.
Waiting for a reply back.
As soon as I have info I will post it.
Macboat;
Reel Angel did order the stand alone WP40's and he says he has an order for stand alone WP25's when they are released. He said he is expecting them this week, but who knows for sure.
He has been selling the WP40 on his site with the modified cable to connect the pump to the Reef Angel. for about the same as Fish-Street.
This is the pump and RA Cable only.
I don't know what he will be selling the WP25 for, but I'm GUESSING $80 plus shipping.
This was a while ago when they were still in the testing phase, so who know the final product will be when it is release.
I have another e-mail into him to confirm what he has told me in the past and the fact that it is in production now and should be release soon.
Waiting for a reply back.
As soon as I have info I will post it.
Macboat;
Reel Angel did order the stand alone WP40's and he says he has an order for stand alone WP25's when they are released. He said he is expecting them this week, but who knows for sure.
He has been selling the WP40 on his site with the modified cable to connect the pump to the Reef Angel. for about the same as Fish-Street.
This is the pump and RA Cable only.
I don't know what he will be selling the WP25 for, but I'm GUESSING $80 plus shipping.
does anyone know the g/h for certain?
I'm reading around 4-5 different sites at the very least and numbers quoted are all different and relatively recent. Everyone is quoting a sales person/someone from Jebo or Fishstreet as their point person for the numbers.
I'm seeing from 800g/h to 2100 g/h.
Another site is currently suggests that this is about 1400 gh.
Additionally, more than 3 sites are suggesting that there are 2 versions being shipped, one for 80 or so and the other for 30 or so (magnets).
However, all of the GBs going on right now are selling the magnetic version for 80 (less after GB).
I really need to know...
if it is 2100gh then i will buy the wp25, if lower than 1800 then I wont.
If I really do have the option of paying 30 for a 2000+g/h pump with suction cups (like all of the maxijets I've ever owned) then I'll totally pay that.
Also, is it confirmed that newly shipped pumps will include variable power supply?
I'm reading around 4-5 different sites at the very least and numbers quoted are all different and relatively recent. Everyone is quoting a sales person/someone from Jebo or Fishstreet as their point person for the numbers.
I'm seeing from 800g/h to 2100 g/h.
Another site is currently suggests that this is about 1400 gh.
Additionally, more than 3 sites are suggesting that there are 2 versions being shipped, one for 80 or so and the other for 30 or so (magnets).
However, all of the GBs going on right now are selling the magnetic version for 80 (less after GB).
I really need to know...
if it is 2100gh then i will buy the wp25, if lower than 1800 then I wont.
If I really do have the option of paying 30 for a 2000+g/h pump with suction cups (like all of the maxijets I've ever owned) then I'll totally pay that.
Also, is it confirmed that newly shipped pumps will include variable power supply?
Then your gonna have to wait till they are actually out and being used. Rumors everywhere like u mentioned. No hard facts.
SimonSKL
New member
Until the actual pump is available and spec published, everything is just speculation. Be patient and wait.
macboat
Nano simplicity
Where else you get info? :hammer:Quote from Jebao is more accurate than that from Fishstreet. The reason you see multiple version may due to the data leaks pre-productions.
Yes confirmed. No VPS. :fun2:
Gorgok
New member
Those numbers pretty much mean anyone with Tunze Nanostreams in their tank currently can just replace the pump (and leave the bracket) with a WP25... Size is identical. I like it =D.
fishcraze_1
Member
I love the wp40 and im sure I'll love the wp25. Just ordered mine this past weekend.
I took the plunge as wellFor $53 to my door I figured it's worth it.
Can you PM me the preorder info also
