Jebao WP25 Information

I've got 2 WP-40's with the new controller's, and 3 more WP-25's from Macboat's group buy on the way that will have the new controllers. They changed the feed button, and now you have to hold it down for about 3 seconds to enter the feed mode. Other than that, I like everything else about it.
 
michaellee64 said:
I've got 2 WP-40's with the new controller's, and 3 more WP-25's from Macboat's group buy on the way that will have the new controllers. They changed the feed button, and now you have to hold it down for about 3 seconds to enter the feed mode. Other than that, I like everything else about it.
Click to expand...

Where did you get WP-40 with new controllers? I am mad now someone else got them first. :mixed:

The controller is the bottle neck the volume is really really low even FS can't get them.

Ours will be here Saturday or Monday and I think you should get yours by Wednesday.:lol2:
 
macboat said:
Where did you get WP-40 with new controllers? I am mad now someone else got them first. :mixed:

The controller is the bottle neck the volume is really really low even FS can't get them.

Ours will be here Saturday or Monday and I think you should get yours by Wednesday.:lol2:
Click to expand...

I got them from another group buy started on another forum. If they had shipped when they were supposed to, we would have got the old controllers. But as luck would have it they were trying to fill other orders (fish-street) and pushed ours back. They were supposed to be put on the slow boat from China, but shipped them by air instead. Lucky Us!!! Really looking forward to getting the WP-25's. Thanks again for doing this! :thumbsup:
 
I was gonna say i never got an email from you but just checked my spam mail and sure enough there it is. I am very sorry, if you do still need help though pm me
 
Mac I know the magnets on the 25 are smaller then the 40, but they seemed just ans strong to me.
I know people are using the 40's on 3/4" acrylic without problems.
 
Also the night sensor does not work in total darkness, it needs a little light, like from the on/off switch on a power strip or I used to use my moonlights.
Click to expand...
:fun4:
Thanks for the info. I thought the controller or sensor was broke.
I walked into the dark room and saw the controller was not in "sleep" mode.
I turned on the table lamp and the controller immediately went into "sleep" mode. I kept turning the light on and off and I as like " Why is this working backwards !!!!
 
Just got 2x WP25 from FS yesterday.
Came with the old controller, but after setting them up on my 120g I don't think I need to cut the speed down on them.

I would like to control them using my APEX controller, though.
I've searched the forums but can't find the information I'm looking for.

Those who are using your APEX to control the WP25's .... what exactly do I need to do this?
 
I have mine controlled by a Reef Angel.

If I remember you can use the cable from Reef Angel and cut the end off that connects to the controller and replace it with an RJ-45 (network cable) end.
 
Got mine today, old controller, its rather noisey!!!



Although cant seem to hear it to well on video. I can clearly hear it on other side of room even with TV on and toddler playing away.
 
You must log in or register to reply here.

Similar threads

A
I need advice on lighting jebao AL-120
Replies
5
Views
825
griss
griss
jasonfrey
GIVEAWAY - AA 3W UV Filter - Help us test out our new APP
Replies
3
Views
156
jasonfrey
jasonfrey
FishMann
Meg Teeth
Replies
4
Views
153
Reefing102
Reefing102
E
What's Old is New Again
Replies
2
Views
491
Uncle99
Uncle99
M
AQma AQuarium Log – New Android app for reef keepers
Replies
0
Views
139
magu
M
Back
Top