Jumper

[apexifd]

I have a older version of 6105 power supply, and realize that I have lost all the jumpers other than the one that on the power supply(18V.)

Will I be able to use the newer version(slim) power supply jumper on the older thicker version of power supply. I do realize the pin is lot shorter on the slim power supply.

 

[rvitko]

The problem is that the pins are too short and will either make no contact or burn out from the loose/poor contact.

 

[apexifd]

The problem is that the pins are too short and will either make no contact or burn out from the loose/poor contact.

thanks