koralia revolution?

[TripleT]

When you put thr prop on look at the indentations. If it is not rotated correctly it not seat all the way down. believe they both take the same bushings, so you can move it over if you want!

That was it!!! I've already got silt flying around my tank waiting for my filter to grab it.

I tried rotating it a couple of times previously with no luck, and the shaft isn't keyed until the last couple of millimeters, which makes it a bit deceiving. I tried a bit more carefully just now, and that was the answer.

Thanks Blurry.

Next I'll try the other new bushing in the 750 and see if that fixes the backward spinning...

 

[pascal32]

glad i worked! enjoy!

 

[sedorusc]

was wondering your guys opinions. I'm setting up the 90 and am positive the 2 mp10s won't be enough flow. how many evolutions should I pick up and what size? anyone have them on a wavemaker now? wondering how good you guys feel they are. wish I had $ for 2 mp40s

 

[TripleT]

was wondering your guys opinions. I'm setting up the 90 and am positive the 2 mp10s won't be enough flow. how many evolutions should I pick up and what size? anyone have them on a wavemaker now? wondering how good you guys feel they are. wish I had $ for 2 mp40s

I'd buy 1 mp40, and maybe 1 koralia, if you're planning on spending $$$.

Get the mp40 first and see if it does everything you need.

What are you keeping in your tank?

 

[Johnny C]

+1. The MP10 pushes more flow (~1,800GPH) than any of the Koralia Evolutions. I'd shoot for an MP40 and add an MP10 down the line if need be. JMO!

 

[pascal32]

What is going in the tank?

 

[sedorusc]

all the sps from my 30 gallon. do you guys think I can pull it off with the two I have for now until I can get the cash saved for a mp40 (1-2months) just want to do this right if I'm doing it at all.

 

[pascal32]

Since i seem to keep forgetting to take a picture of the updated bushing I stole one.

you can get for free by filling out this form: http://www.hydor.com/main/contact PLEASE make sure to properly put on the impeller, it has notches and there is one way it fits best, so go all the way around till you find it. If you are having problems starting backwards with the new bushing, pull the impeller off turn 180 degrees, and re-install.

note that the 750, 1050 and 1400 bushings are the same