Leak in DIY MR5 reactor

[benjc]

I've got a couple of the MR5 DIY reactors; one of which has a slight leak coming from between the acrylic tube and the lower flange at the top of the reactor. Any suggestions for how best to repair?

BTW - Love the reactors, only recommendation would be to put two screw-on connectors (instead of one) like those on the larger models.

 

[Avast Marine]

Hi Ben,

The best way is to try and get a bead of glue on the inside seam. I realize this is a little harder on the small size do to the diameter and hand size. Let me know if you think you can do this.

 

[benjc]

Thanks for the tip. The leak is at the top flange, so access won't be an issue.