LF - 20 to 24 inches of 6" OD Acrylic Tubing

[urbaneks]

I'm looking for some 6" acrylic tubing. I have found it online but all vendors requires the purchase of a 6 foot section as a minimum.

If you have either some extra 6" tubing or an old reactor or skimmer that is 6" in diameter by at least 20" tall, send me a PM here on RC.

Thanks

 

[ademster]

http://www.amazon.com/Clear-acrylic-plastic-Plexiglass-Transparent/dp/B00ORHSWIO/ref=pd_sim_sbs_misc_11?ie=UTF8&refRID=0XC1V7HZ4BSZ2BGJBFZX

 

[ademster]

Port plastics might have it too... give them a call

 

[landy]

I would recommend only cast acrylic tubing. that amazon link does not specify, but I would assume its extruded.

back in the day I would purchase tubing from McMaster, but looks like the price has gone up. 3' of 6" OD 1/8" wall for the low price of 145$ something :eek2:

what are you building if you don't mind me asking?

landy

 

[urbaneks]

I would recommend only cast acrylic tubing. that amazon link does not specify, but I would assume its extruded.

back in the day I would purchase tubing from McMaster, but looks like the price has gone up. 3' of 6" OD 1/8" wall for the low price of 145$ something :eek2:

what are you building if you don't mind me asking?

landy

Thanks all for the input. Checked with Port, they want over $100 for 2'.

I will comb through Amazon, I had not gone that route yet.

I'd like to build a large recirculating BP reactor.

 

[CSample]

I have a skimmer body. About 18" of 8". Trade for a frag of something.

 

[aguila88psi]

Contact them, I'm sure they can cut you a length you need.
http://www.avastmarine.com/ssc/do/product/replacement-parts/Acrylic-Tube

 

[bdevillier]

estreetplastics has 6" OD and 5.75" ID 23 7/8" long clear extruded for 24.99