Mag 24

[J Castellano]

Looking for a mag 24 or 36. Anybody have one to get rid of??

Thanks,

Justin Castellano

 

[J Castellano]

Or an equivelant pump

 

[itZme]

Are you looking for a submersible pump? That's a lot of flow.
A Sequence Dart or Hammerhead may fit the bill if you can use an external pump.

Flow charts are available at Salty Critter

A MAG24 is 265 watts of heat being added to your water if you run it internally and the MAG36 is 360watts! You will have to invest in a chiller to offset the pump

HTH
-- Kevin

 

[4RJN]

If you have any head pressure do not buy the sequence snapper I just got one hooked it up and all I get is literaly a dribble in the tank. I had a mag 7 on it before and I got about 200 gallons an hour so I thought with the 2400gph on the snapper that with the head pressure I have it would have to be better then the mag 7 but it is not.

 

[J Castellano]

Thanks for the info. What if I go with a Mak4 do you think this will suffice. And it is external so I won't have the issue with heat.

Thanks,

Justin Castellano

 

[jh2pizza]

your mail box is full.


The pump has been used for 9 months.

 

[itZme]

How much head pressure are you working with here and what flow rate (in GPH) do you actually want to achieve?

The Mak4 says it is not even 1200gph.

Also look at the wattage you will be using. Some of the Iwaki pumps use over 300w. It wouldn't take long to lose any cost savings on a cheap pump if you are using double the electricity.