bayareaquarist
New member
Well I believe its time for me to start my thread~!
Tank size:
50 gallon TruVu -tall- w/ corner overflow
Sump Size:
25 gallon AGA partitioned w/ acrylic
Stand and canopy:
Unknown manufacturer -Piano black finish-
Skimmer:
Undecided
Lighting:
1 250w SE MH 20k -Hamilton tech- retrofited for canopy
Additional lighting is budget depedant. I would like to go with w/ either double VHO's or T5's.
Flow and circulation:
-Closed loop
-ViaAqua 2600 @ aprox. 740 GPH for cycling
-Modified squid for radomization
-Drain and Return
-1" drain from overflow
-Pump for return is undecided
-Will run cheap Hydor Flow Deflectors for split return
I purchased this tank, stand and canopy from my good buddy Peter AKA Petes97 and we have been doing misc. work to the tank and accessories for about a month. As I am a student on a budget the progess has been slow but in about a week it will be plumbed and flow tested~!
Any constructive criticism is welcome and well apprechiated~!
Wish me luck everyone~!
Pics:
I used 1" polypropolene BH for the CL


This is Pete druming one of the slips we epoxied over the 3/4 inserts of the sqwq -made us feel much more secure having these over the inserts~!

This is the moded Sqwd w/ 3/4 inlets and 1" hose barbs -we trested this very briefly w/ a mag9 and it ran smooth w/ shorter durations

This is Airinhere mixing the artificial rock for bases of two of my rocks that will act as pilars !~TANKS MAN~!

This is the rock sitting in the bases drying

This is the rock w/ bases "cooking"

More pics to come~!
PS can an adminstrator please delete the first thread I started? As I accidentally tabbed to the submit button...~!
Tank size:
50 gallon TruVu -tall- w/ corner overflow
Sump Size:
25 gallon AGA partitioned w/ acrylic
Stand and canopy:
Unknown manufacturer -Piano black finish-
Skimmer:
Undecided
Lighting:
1 250w SE MH 20k -Hamilton tech- retrofited for canopy
Additional lighting is budget depedant. I would like to go with w/ either double VHO's or T5's.
Flow and circulation:
-Closed loop
-ViaAqua 2600 @ aprox. 740 GPH for cycling
-Modified squid for radomization
-Drain and Return
-1" drain from overflow
-Pump for return is undecided
-Will run cheap Hydor Flow Deflectors for split return
I purchased this tank, stand and canopy from my good buddy Peter AKA Petes97 and we have been doing misc. work to the tank and accessories for about a month. As I am a student on a budget the progess has been slow but in about a week it will be plumbed and flow tested~!
Any constructive criticism is welcome and well apprechiated~!
Wish me luck everyone~!
Pics:
I used 1" polypropolene BH for the CL


This is Pete druming one of the slips we epoxied over the 3/4 inserts of the sqwq -made us feel much more secure having these over the inserts~!

This is the moded Sqwd w/ 3/4 inlets and 1" hose barbs -we trested this very briefly w/ a mag9 and it ran smooth w/ shorter durations

This is Airinhere mixing the artificial rock for bases of two of my rocks that will act as pilars !~TANKS MAN~!

This is the rock sitting in the bases drying

This is the rock w/ bases "cooking"

More pics to come~!
PS can an adminstrator please delete the first thread I started? As I accidentally tabbed to the submit button...~!