Mike's 360G Dream House, Dream Tank, Dream Box

mike810

New member
Hey guys,

Figure it's time to start a build thread as the tank delivery date is nearing. Some history, been in the hobby about 8 years. Last tank was a 240G peninsula. Long story short, had the 240G setup for three years before we decided to move. Left behind the tank as a show piece for the next owners as I wanted out of the hobby. That was back in July of 2016, come December, I had the itch again. We were now closer to all the good fish stores so I put in a order for a new tank.

My old 240G build thread can be found here: http://www.reefcentral.com/forums/showthread.php?t=2371868.

Now onto the new build,
Tank: 8x3x2, low iron, Euro brace top & bottom
Stand, 10x3x3, front glass doors, apex panel on one side
2x ATI Hybrid PM
4x MP40QD
2x Tunze 6255
New Apex
KHG Alkalinity Monitor
RE Deluxe 250
RE ATO reservoir
RE Dosing containers
RE Dream Box 8D
RE RD3 230w Return pump
RE RD3 80w reactor pumps
RE 5L & 2.5L reactors
GHL Doser Master & Slave
BRS 150 GPD, booster pump, auto flush
50w Pentair Aquatics UV Sterilizer

Here some pics. I already have pretty much all the equipment except for the tank and stand. Some equipment not pictured. Still wanting to buy more toys. Probably some equipment I forgot to list.

Some pics of the Dreambox being built
20170323_073203_resized.jpg
20170323_073151_resized.jpg
20170323_140827_resized.jpg
20170323_140820_resized.jpg




Finished product

IMG_2749.jpg

IMG_2751.jpg

IMG_2750.jpg



ATO Reservoir and dosing containers

IMG_2752.jpg

IMG_2753.jpg
 
This is a sketch up of the tank and stand

Stand.png


Some of the equipment that has been collecting dust waiting for the tank to arrive

IMG_2305.jpg


KHG Alk Monitor
IMG_2547.jpg

IMG_2548.jpg



Some of the plumbing, I have bought a lot more

IMG_2679.jpg


Eight bags of Tropic Eden grand select sand,some Fritz RPM salt and Bio-spira to kick start the cycle once the tank is here
IMG_2835.jpg


Panworld pump for the mixing station

IMG_2834.jpg


75g RODI & SW containers

IMG_2836.jpg



300 pounds of pukani and shelf rock

IMG_2837.jpg




That's pretty much it for now. Still waiting on some more equipment to arrive along with a shed to house the SW mixing station. More pics to come as they arrive.
 
Hey Mike, I love the last tank you had at your old house and all the new gear you have is what dreams are made of. Subscribed!
 
Subbed...let's go baby!!![emoji482]


Sent from my iPhone using Tapatalk

Thanks for tagging along!


[emoji322] Can't wait to follow along!


Sent from my iPhone using Tapatalk Pro

:dance:

That sump is awesome

Thank you! The build quality is amazing.

Living vicariously through you!! Absolutely looking forward to this!

Sent from my SM-G955U using Tapatalk

lol thanks


:bigeyes::bigeyes:

:rollface:

Top notch equipment. Looking forward to it

Thanks!

Hey Mike, I love the last tank you had at your old house and all the new gear you have is what dreams are made of. Subscribed!

Thank you! Appreciate the kind words.
 
The shed came in today so I got right to work putting it together. The delivery guys delivered the shed to the wrong house! Luckily, my neighbor was nice enough to let me know.

IMG_2838.jpg


IMG_2839.jpg




IMG_2840.jpg


IMG_2841.jpg



Seeing how much space I'll have to work with once the tanks are in.

IMG_2842.jpg


Comes with it's own skylite :thumbsup:

IMG_2843.jpg



Done, was pretty easy and straight forward.

IMG_2844.jpg

IMG_2845.jpg





Waiting for the plumbing parts to come in for the mixing station. Should be here in the next few days. Still need to purchase an EB8, PM2 and probes for the SW container. I'll also be adding a break out box. Might want to try doing automatic water changes so I'll need some float switches for the sw container. Right now I'm thinking I may use the apex DOS for the awc. I've read many people are using it with great success. One issue I'm concerned about is longevity of the DOS using it in this fashion.
 
A 4 port GHL 2.1 doser will serve you well for automatic water changes. The 2.1 is designed for water changes and is heavy duty.With your size tank GHL recommends dedicating a 4 port unit to insure longevity. Dedicate 2 ports for water in and 2 for water out.
 
Looking good! That sump is huuuuuuge. lol

My shed (same company) has been up for over a year now and holding up well.
The only thing I dislike about it is the way the doors attach to the main body. Once in a while a hinge may pop off.
 
A 4 port GHL 2.1 doser will serve you well for automatic water changes. The 2.1 is designed for water changes and is heavy duty.With your size tank GHL recommends dedicating a 4 port unit to insure longevity. Dedicate 2 ports for water in and 2 for water out.

I really like the 2.1 doser, it may be an option. AWC is not a priority until I get everything else up and running. Adding a doser or pump to do AWC will be fairly simple down the road.




Lol look too familiarView attachment 373399
View attachment 373400


Sent from my iPhone using Tapatalk

Told ya in your thread that I had a similar set up going. How are you liking Irvine vs. HB?



Looking good! That sump is huuuuuuge. lol

My shed (same company) has been up for over a year now and holding up well.
The only thing I dislike about it is the way the doors attach to the main body. Once in a while a hinge may pop off.


Yes it is! That's why I made the stand an extra 2' longer so I would have more room in the stand. I wish the hinges would pop off easy. The area where the shed will sit is very narrow and the doors will not open all the way. I will probably have to take the nuts and bolts off the hinges so I can pop the door off when needed.

I had a cube years ago and copied your stand design of your cube! I recently skimmed thru your current thread. Nice setup you got going there. We also moved from the city to the suburbs, after three years, we couldn't take it anymore and moved back to the city but this time by the beach. Luckily, we didn't have to give up square footage but gained a few hundred.


Wow, what a great looking build. Definitely following along!

Thanks for tagging along!

Love Huntington Beach, congrats!!! Cant wait to see what you are doing.

Thank you! We are loving HB also. The temperature here is perfect year round. It was always warm at my old house and average temps for summer was in the 90's.





I just got word today that my tank is ready to be delivered this coming Thursday!! :dance: Will update with pics once the tank is here. It's been a long five months. Plumbing for the mixing station will be here Tuesday so I'm going to try to get on top of that right away.
 
I really like the 2.1 doser, it may be an option. AWC is not a priority until I get everything else up and running. Adding a doser or pump to do AWC will be fairly simple down the road.






Told ya in your thread that I had a similar set up going. How are you liking Irvine vs. HB?






Yes it is! That's why I made the stand an extra 2' longer so I would have more room in the stand. I wish the hinges would pop off easy. The area where the shed will sit is very narrow and the doors will not open all the way. I will probably have to take the nuts and bolts off the hinges so I can pop the door off when needed.

I had a cube years ago and copied your stand design of your cube! I recently skimmed thru your current thread. Nice setup you got going there. We also moved from the city to the suburbs, after three years, we couldn't take it anymore and moved back to the city but this time by the beach. Luckily, we didn't have to give up square footage but gained a few hundred.




Thanks for tagging along!



Thank you! We are loving HB also. The temperature here is perfect year round. It was always warm at my old house and average temps for summer was in the 90's.





I just got word today that my tank is ready to be delivered this coming Thursday!! :dance: Will update with pics once the tank is here. It's been a long five months. Plumbing for the mixing station will be here Tuesday so I'm going to try to get on top of that right away.



I miss HB weather it's cooler than Irvine. Congrats on your tank arriving. If u need any help let me know I'm free every day no more work lol


Sent from my iPhone using Tapatalk
 
Back
Top