MJ mods-Is anyones actually working?

[gflat65]

Are you guys putting washers below the prop, or above the prop?

The one that started working after cutting the rigid shaft down is still kicking. I have one that will only run in reverse (used some flex tubing between the prop and the center brace...), and yet another that continues to kick abck and forth...

 

[dhnguyen]

Ok so I discovered something tonight that may help you guys with the back and forth problems.

Because the rigid tube isn't glued into the flexibe airline, after a time it (the rigid tube) may work itself out a bit. Just enough to possibly cause a wobble or out far enought aht the prop will start hitting the stopper and get stuck. If you take it out and push the rigid tube all the way back in then run a bead of superglue around the rigid tube and the flex airtline should take care of it.

Hope that will help some.

D.