mounting an MJ mod in corner

[einsteins]

Hello all

I am considering making a couple of the MJ mods but I need a way to mount them in the corner of my tank so they are angled to shoot water from the back corner to the center of the front glass.

Do any of you using this mod have a way that you mounted the MJ's like that?

Thanks for any help you can give.....

einsteins

 

[einsteins]

bump

 

[outy]

i used the plastic hang on clip it came with.

get it hot with a lighter and bend it to any shape or position you want

you will need the rubber cup to keep it from vibrating on the glass though

 

[xtrstangx]

Instead of just gluing a bracket directly onto a magnet. Get a piece of like 1/8" or 1/4" acrylic and bend it into the angle you want with a propane torch (careful). Then you could just glue the bracket to one side of the acrylic and the other to the magnet.

 

[einsteins]

I dont think the bracket that came with the MJ is long enough...I want it about 1/2 way down in my tank because my CL system creats plenty of movement up high.

Thanks again

einsteins