MOVING SALE - Part2 - Reef Tanks and Equipment
- Thread starter mimosa
- Start date
janderson8
Moved On
Do you still have the chiller? If so PM me with a price to the 73135 area code.
Jason
Jason
mimosa
New member
Just a note...
Just a note...
Some reefers asked if the pictures were taken prior to the install of the equipment, when they were brand-new.
As many of you can attest, all the pictures represent the current condition of the equipment as they are now, after the system was taken down.
I cleaned the equipment, but the pictures accurately represent what you will get.
Just a note...
Some reefers asked if the pictures were taken prior to the install of the equipment, when they were brand-new.
As many of you can attest, all the pictures represent the current condition of the equipment as they are now, after the system was taken down.
I cleaned the equipment, but the pictures accurately represent what you will get.
mimosa
New member
175W Hamilton SE MH Fixture - Reduced to $120
175W Hamilton SE MH Fixture - Reduced to $120
As we were testing this fixture with a fellow reefer today, we found out that the ballast in it is a little on the noisier side. This will be a problem in a living room environment. In a basement or dedicated sump/refugium room, it will work fine. It fires bulbs without any problem, but noisy. I am the original owner of this fixture and I have used it over the refugium in the basement without problem for 2 years. Bulb in it is a 4-month old Hamilton 175W 14000K.
So, I am reducing the price of this fixture to $120, in case you like to replace its ballast with a newer and less noisy one which costs about $40. Again, as is it works fine, but a little noisy.
Thanks.
175W Hamilton SE MH Fixture - Reduced to $120
As we were testing this fixture with a fellow reefer today, we found out that the ballast in it is a little on the noisier side. This will be a problem in a living room environment. In a basement or dedicated sump/refugium room, it will work fine. It fires bulbs without any problem, but noisy. I am the original owner of this fixture and I have used it over the refugium in the basement without problem for 2 years. Bulb in it is a 4-month old Hamilton 175W 14000K.
So, I am reducing the price of this fixture to $120, in case you like to replace its ballast with a newer and less noisy one which costs about $40. Again, as is it works fine, but a little noisy.
Thanks.
mimosa
New member
Items Sold
Items Sold
The following items have been sold:
- Korallin C4002 Calcium Reactor package
- PFO 400W DE HQI pendant system with 20000K bulb
Note: The other PFO 400W DE HQI pendant system with 10000K bulb is available. It is basically same as the one that was sold, but with a 10000K bulb instead. Both used for 2 weeks.
Thanks.
Items Sold
The following items have been sold:
- Korallin C4002 Calcium Reactor package
- PFO 400W DE HQI pendant system with 20000K bulb
Note: The other PFO 400W DE HQI pendant system with 10000K bulb is available. It is basically same as the one that was sold, but with a 10000K bulb instead. Both used for 2 weeks.
Thanks.
mimosa
New member
Remaining Items
Remaining Items
#1 - Brand new, never used, 225G Clarity Plus tank + Custom steel stand combo (including mechanism to hang the lights, and all the tank plumbing) - $1600
#3 ââ"šÂ¬Ã¢â‚¬Å“ Acrylic Sump - $150
#4 - Acrylic Inwall Wall Divider Tank or Refugium - $150
#11 - Coralife Super Luft Air Pump - Brand-new - $55
#14 - Aqualogic 1/4HP Deltastar Titanium Inline Chiller with Dual Staged Aqualogic Controller - $600
#15 - 175W Single Ended Hamilton Reefsun Metal Halide Fixture with 175W 14000K SE Hamilton bulb (bulb is used 4 months) - Magnetic ballast is a little noisy - $120
#16 ââ"šÂ¬Ã¢â‚¬Å“ 400W DE PFO HQI Pendant Complete Setup with 10000K bulb ââ"šÂ¬Ã¢â‚¬Å“ Used 2 weeks - $300
#18 - Dual 250W DE PFO HQI Pendant Complete Setup with 10000K DE AB and 14000K DE Hamilton bulbs ââ"šÂ¬Ã¢â‚¬Å“ Used 6 weeks - $475
#19 ââ"šÂ¬Ã¢â‚¬Å“ 400W Blueline E-Ballast - $90
#20 ââ"šÂ¬Ã¢â‚¬Å“ 250W DE Hamilton 14000K MH bulb ââ"šÂ¬Ã¢â‚¬Å“ Brand-new, never fired - $60
Remaining Items
#1 - Brand new, never used, 225G Clarity Plus tank + Custom steel stand combo (including mechanism to hang the lights, and all the tank plumbing) - $1600
#3 ââ"šÂ¬Ã¢â‚¬Å“ Acrylic Sump - $150
#4 - Acrylic Inwall Wall Divider Tank or Refugium - $150
#11 - Coralife Super Luft Air Pump - Brand-new - $55
#14 - Aqualogic 1/4HP Deltastar Titanium Inline Chiller with Dual Staged Aqualogic Controller - $600
#15 - 175W Single Ended Hamilton Reefsun Metal Halide Fixture with 175W 14000K SE Hamilton bulb (bulb is used 4 months) - Magnetic ballast is a little noisy - $120
#16 ââ"šÂ¬Ã¢â‚¬Å“ 400W DE PFO HQI Pendant Complete Setup with 10000K bulb ââ"šÂ¬Ã¢â‚¬Å“ Used 2 weeks - $300
#18 - Dual 250W DE PFO HQI Pendant Complete Setup with 10000K DE AB and 14000K DE Hamilton bulbs ââ"šÂ¬Ã¢â‚¬Å“ Used 6 weeks - $475
#19 ââ"šÂ¬Ã¢â‚¬Å“ 400W Blueline E-Ballast - $90
#20 ââ"šÂ¬Ã¢â‚¬Å“ 250W DE Hamilton 14000K MH bulb ââ"šÂ¬Ã¢â‚¬Å“ Brand-new, never fired - $60
TheCoralReef731
New member
If you have an RODI system that you are willing to sell, could I have it?
mimosa
New member
FREE WOOD STAND with Sump and Refugium Purchase
FREE WOOD STAND with Sump and Refugium Purchase
CoralReef, I will keep the RO/DI and use its RO output for drinking water...
Whoever buys the sump and refugium, I will give the wood stand I used for them for free. Also, all their associated plumbing parts are included.
The wood stand is modular as well, similar to the steel display stand. It is constructed using 3/4" plywood for top, 2x4 lumber, heavy duty bolts, and can be taken apart to carry. Top and bottom measure 72"x48" and cannot be taken apart further.
The dimensions of the wood stand:
72"L x 48"W x 36.5"H
If you have the tools to cut wood, it can be adjusted to your needs. If not, I might be able to do it for you as you wait, with your help.
Pictures can be seen in my gallery.
Thanks.
FREE WOOD STAND with Sump and Refugium Purchase
CoralReef, I will keep the RO/DI and use its RO output for drinking water...
Whoever buys the sump and refugium, I will give the wood stand I used for them for free. Also, all their associated plumbing parts are included.
The wood stand is modular as well, similar to the steel display stand. It is constructed using 3/4" plywood for top, 2x4 lumber, heavy duty bolts, and can be taken apart to carry. Top and bottom measure 72"x48" and cannot be taken apart further.
The dimensions of the wood stand:
72"L x 48"W x 36.5"H
If you have the tools to cut wood, it can be adjusted to your needs. If not, I might be able to do it for you as you wait, with your help.
Pictures can be seen in my gallery.
Thanks.
Similar threads
