Nitroq2
New member
I am going to take a break from the hobby, and sell everything I have. Other than some hair Algae nothing is wrong with the tank and things seems to be growing in nicely. The cure for the hair algae is water changes which I have been unable to do, due to everything going on in life and hence be one of the reasons I am selling. A quick fix is a sea slug that would have it gone within a few weeks. But anyway this thread isn't about the algae, but the setup I am selling. I have invested alot of time and money on this setup and to be honest its pretty close to ran itself over the last 6-8 months. The setup will be sold as an entire unit and will be picked up on site. I can supply good pictures of everything. But it is stocked fairly well and I will try to list everything. I will start with Hardware then Livestock, and I am sure I will add things as think of them here in this thread. I will take $2500 for the entire setup and I can assure you there is a whole lot more invested. The Stand and tank and sump is well worth a thousand without everything else.
Here goes the list:
90g AGA with megaflow and plumbing and mag 7.5 return
Custom Built Cherry Wood Stand and Canopy (Built tall so that bottom of tank is waist high, Also tall canopy to allow lights to sit about a foot off the water)
30g AGA custom sump sectioned into three sections and drilled for dual external returns.
Hamilton Light Fixture with (2) 250w Halides and (2) PC actinics the bulbs in this fixture are not very old maybe a couple months. Also LED night lights installed in the canopy with a dimmer. Lights are all on timers and also have clip on lights in the sump area over the fuge that is offset from the halides.
(2) heaters been so long I dont recall but I think on is a stealth not sure about the other but they work also has a digital temp sensor.
ASM G2 Skimmer that I just replace the pump on maybe less than a month ago, and instead of replacing I upgraded it to the newer larger sedra. Its a work horse and pull thick dark green skimmate.
(2) Seio 1500 Powerheads with magnets mounts, both of these are controlled but the seio controller that is mounted underneath.
Tunze Osmolater (touted as the best) that I have never ever had misfire does the water top off from a stealth looking plastic garbage can.
Mag 350 that can be used to run carbon or other media.
Here goes the list:
90g AGA with megaflow and plumbing and mag 7.5 return
Custom Built Cherry Wood Stand and Canopy (Built tall so that bottom of tank is waist high, Also tall canopy to allow lights to sit about a foot off the water)
30g AGA custom sump sectioned into three sections and drilled for dual external returns.
Hamilton Light Fixture with (2) 250w Halides and (2) PC actinics the bulbs in this fixture are not very old maybe a couple months. Also LED night lights installed in the canopy with a dimmer. Lights are all on timers and also have clip on lights in the sump area over the fuge that is offset from the halides.
(2) heaters been so long I dont recall but I think on is a stealth not sure about the other but they work also has a digital temp sensor.
ASM G2 Skimmer that I just replace the pump on maybe less than a month ago, and instead of replacing I upgraded it to the newer larger sedra. Its a work horse and pull thick dark green skimmate.
(2) Seio 1500 Powerheads with magnets mounts, both of these are controlled but the seio controller that is mounted underneath.
Tunze Osmolater (touted as the best) that I have never ever had misfire does the water top off from a stealth looking plastic garbage can.
Mag 350 that can be used to run carbon or other media.
Your good for the hobby!but I know it can be a little demanding at times.Wish I had the coin.I know your stuff is top notch.Hope someone gets it all so you don't have to break it up!SWEET setup!!!!
