dwdenny
New member
I was looking at putting a 2X13w PC retro over a DIY nano tank that I am building. However the sockets are the GX23 and are not moisture resistant. Should I go with a different retro if so which is better. The tank will be 12"X12"X12" with a 3" sandbed or so might go down to 2". The tank will be acrylic and I plan to run an ehiem 1046 or 1048 external with loc-line spilt return. 1/2" bulkead to drain to the pump and return. The plumbing will be flex pipe 3/4". Any suggestions comments are welcome.
Doug
Doug
Last edited:
