Need advise Please

[xpyder]

I have a 125g 60"X18"X24" tank, Sps on top 2/3 of the tank and few softies on the bottom with 3-4" DSB and two 1/2" sea swirl on each side, thinking of TS24 but i heard its too much for this size of aquarium. Now will the 6000 X2 with multicontroller best fitted here?

 

[rvitko]

I think I would choose the 2 6000's and run them in pulse mode on the multicontroller this should cover everything pretty well unless you have really dense rock work or peninsular rock formations that obstruct flow.

 

[xpyder]

Thanks Roger for responding. Yes i have a lot of rocks maybe over 200 lbs halfway high from end to end, so my sps are 2/3rds high. I used to have only (3) 175w MH that's why its set up this way but recently switched to 250W HQI. With this kind of set up do you really think (2) 6000 are enough.

 

[rvitko]

It might not be, this is a really tough call. I suppose you might be better off with the 6100's but running them turned down, at the lowest speed the 6100 is about the same as a 6000 at nearly full speed.